[Asterisk-Users] * point to point t1 solution?

Thu Jan 26 08:28:46 MST 2006

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Ross,

I was a little frustrated with Damon's initial reaction to the post as
well.  However, we have moved past this ... This is actually turning out
to be quite an interesting thread, lets not get side-tract.

Regards,

Sean

Ross C wrote:
> Uhhhhhh?..maybe you should ask Jean-Michel for a refund.
> 
> Wait, you haven?t paid a dime for this. Or Asterisk. Or most of the
> Asterisk add-ons.
> 
> I always see people getting mad at other people for ?bad advice? or ?bad
> answers? to their questions; people seem to forget that all this stuff
> is FREE.  If Jean-Michel?s advice isn?t what you?re looking for, say
> ?Thanks for the info, but I?d really like to know?..?  (geez, I feel
> like someone?s mom).  He?s taken time out of HIS day to try to help YOU
> for FREE.
> 
> If a high level of support and definitive answers are a must for your
> situation, pay someone with experience, or see the following:
> 
>  
> 
> <expensive IP telephony>
> 
> http://www.cisco.com <http://www.cisco.com/>
> 
> http://www.nortel.com <http://www.nortel.com/>
> 
> http://www.inter-tel.com <http://www.inter-tel.com/>
> 
> http://www.avaya.com <http://www.avaya.com/>
> 
> http://www.3com.com <http://www.3com.com/>
> 
> </expensive IP telephony>
> 
>  
> 
> ------------------------------------------------------------------------
> 
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Damon Estep
> *Sent:* Thursday, January 26, 2006 3:22 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* RE: [Asterisk-Users] * point to point t1 solution?
> 
>  
> 
> Actually, it is a quite appropriate response to ANYONE that includes
> this type of comment in their reply
> 
>  
> 
> ?You probably need a couple of T1 cards, and some paid consulting to get
> it working (I've never done it myself but that's how I would do it if I
> was in a hurry)?
> 
>  
> 
> Perhaps something like this would have been better received;
> 
>  
> 
> ?I know it can (or cannot) be done, and here is the name of someone that
> might be willing to help you for a fee?
> 
>  
> 
> Look back though the archives and you will see that I have had some
> participation here myself  in the past?
> 
>  
> 
> D
> 
>  
> 
> ------------------------------------------------------------------------
> 
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Simon
> Woodhead
> *Sent:* Thursday, January 26, 2006 2:01 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [Asterisk-Users] * point to point t1 solution?
> 
>  
> 
> Bad day Damon? I think your comments are a little harsh towards someone
> who is an active and informed contributor to the list. Jean-Michel could
> have ignored you but he chose to share what he could. Maybe someone else
> will have the complete answer to your question.
> 
> On 1/26/06, *Damon Estep* <damon at suburbanbroadband.net
> <mailto:damon at suburbanbroadband.net>> wrote:
> 
> Jean-Michel,
> 
> You missed the entire point - the question is IS ASTERISK CAPABLE OF
> EMULATING A POINT TO POINT T1 BETWEEN 2 BOXES, AND IF SO ARE THERE ANY
> WEB BASED HINTS I MIGHT LOOK AT?  Not WILL YOU DO IT FOR ME?
> 
> Your response to this post was un-informative and quite frankly it is
> the type of useless response that most mailing lists and newsgroups
> could do without.
> 
> Damon
> 
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
> <mailto:asterisk-users-bounces at lists.digium.com> [mailto:asterisk-users-
> <mailto:asterisk-users->
>> bounces at lists.digium.com <mailto:bounces at lists.digium.com>] On Behalf
> Of Jean-Michel Hiver
>> Sent: Thursday, January 26, 2006 1:36 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [Asterisk-Users] * point to point t1 solution?
>>
>> Damon Estep a écrit :
>>
>> > Can anyone point me to a reference or sample config for bypassing a
>> > nailed up (point to point) t1 between two PBXs with asterisk and a
>> > pair of t1 cards?
>> >
>> >
>> >
>> > Right now I have 2 Nortel norstars connected to each other via a
>> > leased line t1. I also have a solid 10mbps low latency microwave link
>> > between the 2 sites.
>> >
>> You probably need a couple of T1 cards, and some paid consulting to get
>> it working (I've never done it myself but that's how I would do it if I
>> was in a hurry)
>>
>>
>> > My goal is to run an asterisk box at each end with a t1 card and
>> > Ethernet card to act as a TDM<>SIP gateway to bypass the nailed T1 in
>> > a relatively dumb configuration, with the goal of migrating off of the
>> > norstars eventually.
>> >
>> If it's a point to point Asterisk <-> Asterisk configuration, why use
>> SIP rather than IAX? IAX configuration is very easy, so once you get the
>> norstar <-> asterisk link up it'll be a piece of cake.
>>
>> Cheers,
>> Jean-Michel.
>>
>> --
>> Jean-Michel Hiver - http://ykoz.net/
>> Découvrez la Réunion des Technologies IP & Telecom
>> TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com
> <http://Easynews.com> --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com <http://Easynews.com> --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> <http://lists.digium.com/mailman/listinfo/asterisk-users>
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFD2Oquy9wPyZpnL2URAuRSAJwNVAGDXWUGZC8uDU5ZeWlxhS/urQCfbmtM
8Ed28SMrRvEMEQPTws7BERo=
=ee4t
-----END PGP SIGNATURE-----