[Asterisk-Users] Digium hardware

[Bogdan Moldovan]

Hello,
 
The 5 exchange lines I assume they are analogic. For them you will need 5
FXO ports. You can buy a TDM04B and a TDM01B (this will get you to the 5
FXO). Make sure you have 2 PCI slots available.
 
Now for the extensions you need 
- IP Phones 
or
- ATAs (if you want to reuse your analog phones)
 
IP Phones you can buy from different companies. I like Aastra, Polycom...
 
For ATAs I like Linksys PAP2.
 
Bogdan Moldovan
VoIP SIP: sip://101@obelisk.modulo.ro
VoIP IAX: iax://obelisk.modulo.ro/101
MODULO Consulting
"The Future Is Not What It Used To Be"
http://www.modulo.ro 


________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Cisco - Kameko
Sent: Wednesday, January 25, 2006 9:17 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Digium hardware


Hello,
 
I want to setup an asterisk pabx. I want to understand more on what hardware
(PCI cards........) i will need to do this. I have 5 xchange lines and 30
extensions within our offices. I have just finished installing Fedora Core
and downloaded asterisk-1.2.3.tar.gz
<http://ftp.digium.com/pub/asterisk/asterisk-1.2.3.tar.gz>  and
zaptel-1.2.2.tar.gz <http://ftp.digium.com/pub/zaptel/zaptel-1.2.2.tar.gz>
which i want to install.
 
In need or your advise ASAP
 
Regards,
 
SOUL