[Asterisk-Users] Dial String Questions

Alexander Lopez alex.lopez at opsys.com
Wed Jan 25 21:23:29 MST 2006


MCI should be expecting them as DTMF on the B channel instead of the D.
 
You can try setting this up in your extensions.conf:
 
exten => 1XXXXXXXXXX,1,Dial(Zap/g2/${EXTEN})
 
that will bridge the call once you dial.
 
It may also be that your SIP phones are not sending DTMF tones, What are
the DTMF settings in sip.conf and on the soft phone.
 
 
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Schochet,
Wes
Sent: Wednesday, January 25, 2006 5:24 PM
To: 'Asterisk Users'
Subject: [Asterisk-Users] Dial String Questions
 
Hi all-
 
My TDM long distance is provided by MCI.  We use account codes where MCI
sends a challenge tone after receiving 1NXXNXXXXXX.  Anyone have any
suggestions of how to accomplish this?  I can't get the soft phones to
send the DTMF (the other digits go down the d-channel of our PRI).  I
also have not bee able to get the dial or the outgoing queue command to
work.  Anyone run into this?
 
Wesley A. Schochet
Senior Telecommunications Engineer
Select Comfort Corporation
*763-551-7757
*651-592-5441
*wes.schochet at selectcomfort.com <mailto:*wes.schochet at selectcomfort.com>

 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060125/a7888e95/attachment.htm


More information about the asterisk-users mailing list