[Asterisk-Users] Nortel Meridian Opt 81C and PRI

Greg Camp Greg.Camp at ExcellSvcs.com
Wed Jan 25 07:56:06 MST 2006


This is on an MSDL card.  What is your individual trunk member config?
Our zapata.conf / zaptel.conf are basically the same.  No, they are
exactly the same....

Interesting side note: we located an old Option 11 (release 19 with a
cartridge!) and were able to get the below config to work just fine.
Obviously there are some subtle differences since there is no MSDL on an
Option 11, but other than the missing prompts due to an older OS on the
Nortel, the config is the same.  We don't really want to leave the
Option 11 running just to support Asterisk.

Do you get name display on your Asterisk phones when someone from the
Nortel calls?  That's one thing that doesn't happen on the Opt11.  Names
do get displayed on the Nortel phone when called from an Asterisk phone,
however.

REQ  issp

VERSION 2611 
RELEASE 25 
ISSUE 30 + MDCS01 NA00

PSWV VERSION: PSWV 53

cequ
  DLOP  NUM DCH FRM LCMT YALM TRSH
   PRI  088 23  ESF B8S  FDL  00 

ADAN     DCH 88 
  CTYP MSDL 
  GRP  0 
  DNUM 12 
  PORT 0 
  DES  asterisk
  USR  PRI 
  DCHL 88 
  OTBF 32 
  PARM RS422  DTE 
  DRAT 64KC
  CLOK EXT 
  IFC  ESS5
  SIDE USR 
  CNEG 1 
  RLS  ID  1 
  RCAP ND2 
  T200 3 
  T203 10 
  N200 3 
  N201 260 
  K    7

TN   088 01 
TYPE TIE 
CDEN SD
CUST 0 
TRK  PRI 
PDCA 1 
PCML MU
NCOS 0 
RTMB 38 1 
B-CHANNEL SIGNALING 
TGAR 1 
AST  NO  
IAPG 0 
CLS  UNR DIP CND WTA LPR APN THFD HKD  
     P10 VNL 
TKID 
DATE 24 JAN 2006

TYPE RDB  
CUST 00 
ROUT 38 
DES  ASTERISK
TKTP TIE 
NPID_TBL_NUM   0
ESN  NO  
CNVT NO  
SAT  NO  
RCLS INT 
DTRK YES 
DGTP PRI  
ISDN YES 
    MODE PRA 
    IFC  ESS5
    SBN  NO
    PNI  00000 
    SRVC NNSF
    NCNA YES 
    NCRD YES 
    CHTY BCH 
    CTYP UKWN
    INAC NO  
    ISAR NO  
    CPUB OFF
    DAPC NO  
    BCOT 0 
DSEL VOD 
PTYP PRI 
AUTO NO  
DNIS NO  
DCDR NO  
ICOG IAO 
SRCH LIN 
TRMB YES 
STEP 
ACOD 8138
TCPP NO  
PII NO  
TARG 01 
CLEN 1 
BILN NO
OABS 
INST 
IDC  NO  
DCNO 0 *
NDNO 0 
DEXT NO  
ANTK 
SIGO STD 
ICIS YES
TIMR ICF 512 
     OGF 512 
     EOD 13952 
     NRD 10112 
     DDL 70 
     ODT 4096 
     RGV 640 
     GRD 896 
     SFB 3 
     NBS 2048 
     NBL 4096 
    IENB 5 


PAGE 002 

     TFD 0 
DRNG NO  
CDR  NO  
MUS  NO  
RACD NO  
FRL  0 0 
FRL  1 0 
FRL  2 0 
FRL  3 0 
FRL  4 0 
FRL  5 0 
FRL  6 0 
FRL  7 0 
OHQ  NO  
OHQT 00 
CBQ  NO  
AUTH NO  
PLEV 2 
ALRM NO  
ART  0 
SGRP 0 
AACR NO

Thanks,
Greg
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Schochet, Wes
> Sent: Tuesday, January 24, 2006 8:38 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI
> 
> I have a 61c running steady and reliable.  ENLL in 60 will always
bring up
> the DCHannel, whether it's disabled in 96 or not.  Lets see some M1
> configs
> - I'll show you mine if...
> 
> LD 22
> REQ  prt
> TYPE cequ
> <blah blah>
>   DLOP  NUM DCH FRM TMDI LCMT YALM TRSH
>    TRK  020 24  ESF NO   B8S  FDL  00
>    PRI  002 24  ESF NO   B8S  FDL  00
> <blah blah>
>         019 23  ESF NO   B8S  FDL  00
> <blah blah>
> 
> REQ  PRT
> TYPE ADAN DCH 5
> 
> ADAN     DCH 5
>   CTYP MSDL
>   DNUM 10
>   PORT 2
>   DES  Asterisk
>   USR  PRI
>   DCHL 19
>   OTBF 32
>   PARM RS422  DTE
>   DRAT 64KC
>   CLOK EXT
>   IFC  ESS5
>   SIDE USR
>   CNEG 1
>   RLS  ID  1
>   RCAP ND2
>   MBGA NO
>   OVLR NO
>   OVLS NO
>   T200 3
>   T203 10
>   N200 3
>   N201 260
>   K    7
> 
> 
> 
> >ld 21
> PT1000
> 
> REQ: PRT
> TYPE: RDB
> CUST 0
> ROUT 19
> 
> TYPE RDB
> CUST 00
> ROUT 19
> DES  ASTERISK
> TKTP TIE
> NPID_TBL_NUM   0
> ESN  NO
> CNVT NO
> SAT  NO
> RCLS INT
> VTRK NO
> DTRK YES
> BRIP NO
> DGTP PRI
> ISDN YES
>     MODE PRA
>     IFC  ESS5
>     SBN  NO
>     PNI  00000
>     SRVC NNSF
>     NCNA YES
>     NCRD YES
>     CHTY BCH
>     CTYP UKWN
>     INAC NO
>     ISAR NO
>     CPUB OFF
>     DAPC NO
>     BCOT 0
> DSEL VOD
> PTYP PRI
> AUTO NO
> DNIS NO
> DCDR NO
> ICOG IAO
> SRCH LIN
> TRMB YES
> STEP
> ACOD 2019
> TCPP NO
> PII NO
> TARG 01
> CLEN 1
> BILN NO
> OABS
> INST
> IDC  NO
> DCNO 0 *
> NDNO 0
> DEXT NO
> ANTK
> SIGO STD
> ICIS YES
> TIMR ICF  512
>      OGF  512
>      EOD  13952
>      NRD  10112
>      DDL  70
>      ODT  4096
>      RGV  640
>      GRD  896
>      SFB  3
>      NBS  2048
> 
> 
> PAGE 002
> 
>      NBL  4096
> 
>      IENB  5
>      TFD  0
>      VSS  0
>      VGD  6
> DRNG NO
> CDR  NO
> VRAT NO
> MUS  NO
> RACD NO
> FRL  0 0
> FRL  1 0
> FRL  2 0
> FRL  3 0
> FRL  4 0
> FRL  5 0
> FRL  6 0
> FRL  7 0
> OHQ  NO
> OHQT 00
> CBQ  NO
> AUTH NO
> TDET NO
> TTBL 0
> ATAN NO
> PLEV 2
> ALRM NO
> ART  0
> SGRP 0
> AACR NO
> 
> 
> Dchannel daughter card on a NT5D12 or an actual MSDL?  Jumpers can
kill!
> 
> Asterisk Files:
> 
> zaptel.conf:
> 
> loadzone = us
> defaultzone = us
> 
> #span definitions
> span = 1,1,0,esf,b8zs
> 
> #channel definitions
> bchan = 1-23
> dchan = 24
> 
> 
> zapata.conf
> 
> [channels]
> context = from-internal
> switchtype = 5ess
> usecallerid = yes
> echocancel = yes
> echocancelwhenbridged = yes
> rxgain = 0.0
> txgain = 0.0
> 
> signalling = pri_net
> group = 1
> channel = 1-23
> 
> I am using a sangoma A101 (which rocks, btw).  Should be the same
diff...
> 
> 
> -----Original Message-----
> From: Greg Camp [mailto:Greg.Camp at ExcellSvcs.com]
> Sent: Tuesday, January 24, 2006 4:08 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI
> 
> >
> > Yes, we have disabled the dch and loop several times (both on Nortel
> and
> > Asterisk sides).  We also disabled the entire MSDL card and issued a
> > full download to both the MSDL and the DCH.  Neither got us any
> further.
> >
> > Have you had success getting PRI between a Nortel 81C and Asterisk
to
> > work?
> >
> > Thanks,
> > Greg
> >
> > OK, but did you do the sequence as I mentioned, probably I guess.
> > 1)dis dch, 2)dis loop, 3)enable loop, 4)enable dch as below -
> >
> > Unfortunately, although I've supported multiple 81's I've only had a
> > requirement to connect an Asterisk to a little Avaya INDeX.
> >
> > Steve
> 
> Yes, we followed that sequence.  We've had to follow that sequence
with
> some
> of our carriers as well to make the b-channels come up properly.
> 
> Greg
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list