[Asterisk-Users] Nortel Meridian Opt 81C and PRI

[Steve Rawlings]

---- Original Message ----- 
From: "Greg Camp" <Greg.Camp at ExcellSvcs.com>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, January 24, 2006 3:07 PM
Subject: [Asterisk-Users] Nortel Meridian Opt 81C and PRI


We've been trying unsuccessfully to connect our Meridian Option 81C to a
TE110P via PRI.  We've followed the directions in
asterisk-meridian-a1.pdf (link on
http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it
doesn't seem to work on our 81C (even though many, many users report it
works very well on Option 11's). 

Has anyone had any success in getting the above combination to work with
Asterisk?

The results we get seem to vary depending on how closely we follow the
reference guide that Andy put together.  If we follow it exactly, the
d-channel comes up, but the b-channels stay in MBSY instead of IDLE.

I can post more details and config files if requested, but I'm curious
if anyone has successfully made an Option 81C work with PRI to an
Asterisk box.

Thanks,

Greg
Greg.Camp at ExcellSvcs.com
Excell Services
806-747-2474
806-747-5047 fax
 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Hi,

You've probably already tried it but if not, give this a go,

1)dis dch, 2)dis loop, 3)enable loop, 4)enable dch as below -

ld 96
stat dch
DCH XX : OPER RLS          AUTO - response maybe

dis dch [whatever d ch no.]
****
ld 60

.stat

PRI2 LOOP YY - ENBL
REF CLK: DSBL
SERVICE RESTORE: NO
ALARM STATUS: OOS NO AUTO STRT
CH 01 - MBSY TIE  VOD * - response maybe

disl [whatever loop no.]
OK - response

enll [whatever loop no.]
OK - response
****
ld 96
enl dch [whatever d ch no.]

DCH: Y  EST CONFIRM TIME: ..........
DCH: Y  EST REMOTE TIME:........... - response maybe

stat dch [whatever d ch no.]
DCH XX : OPER  EST    ACTV  AUTO - response hopefully

also try dis and re-enable the asterisk end.

Steve