[Asterisk-Users] Re: Zaptel issues

Facundo Ameal fameal at gmail.com
Tue Jan 24 04:15:56 MST 2006 

i don't see any other solution. you have t orecompile either the
kernel or zaptel, I recommend recompiling the kernel because then you
can continue using the new gcc version. it is not difficult, if you
want i can give you intructions so you can do it in a minute.

reagrds,

2006/1/24, Mike Hammett <asterisk-users at ics-il.net>:
> Yeah, recompiling the kernel is a bit over my head, but I don't want to
> install an older gcc, so I'll just have to await some hand-holding from the
> people that put my kernel together (OpenVZ).
>
>
> ----
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
>
> ----- Original Message -----
> From: <asterisk-users-request at lists.digium.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Monday, January 23, 2006 8:02 PM
> Subject: Asterisk-Users Digest, Vol 18, Issue 143
>
>
> > Send Asterisk-Users mailing list submissions to
> > asterisk-users at lists.digium.com
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > or, via email, send a message with subject or body 'help' to
> > asterisk-users-request at lists.digium.com
> >
> > You can reach the person managing the list at
> > asterisk-users-owner at lists.digium.com
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Asterisk-Users digest..."
> >
> >
> > ------------------------------
> >
> > Message: 15
> > Date: Mon, 23 Jan 2006 22:35:28 -0300
> > From: Facundo Ameal <fameal at gmail.com>
> > Subject: Re: [Asterisk-Users] Zaptel issues
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > <asterisk-users at lists.digium.com>
> > Message-ID: <a563d36f0601231735v63b3c3a8s at mail.gmail.com>
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > I think you have comiled your kernel with a version of gcc and zaptel
> > with another one, Compile zaptel drivers with gcc-3.3 and you will
> > solve it, otherwise, you cas recompile your kernel with the new
> > version of gcc.
> >
> > i also had that problem.
> >
> > 2006/1/23, Mike Hammett <asterisk-users at ics-il.net>:
> >> [root at OpenVZ ~]# which modprobe
> >> /sbin/modprobe
> >> [root at OpenVZ ~]# modprobe --version
> >> module-init-tools version 3.1-pre5
> >> [root at OpenVZ ~]# dmesg | tail
> >> zaptel: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> zaptel: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> zaptel: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> ztdummy: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should
> >> be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> zaptel: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> zaptel: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> ztdummy: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should
> >> be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> zaptel: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> zaptel: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >> ztdummy: version magic '2.6.8-022stab061.1 686 4KSTACKS gcc-3.4' should
> >> be
> >> '2.6.8-022stab061.1 686 4KSTACKS gcc-3.3'
> >>
> >>
> >> It looks like my gcc versions are different from the one that made the
> >> kernel and the one that made the zaptel stuff.
> >>
> >> So then of the zt lines, do I only need:
> >>
> >> install ztdummy /sbin/modprobe --ignore-install ztdummy && /sbin/ztcfg
> >>
> >>
> >>
> >> ----
> >> Mike Hammett
> >> Intelligent Computing Solutions
> >> http://www.ics-il.com
> >>
> >>
> >> ----- Original Message -----
> >> From: <asterisk-users-request at lists.digium.com>
> >> To: <asterisk-users at lists.digium.com>
> >> Sent: Friday, January 13, 2006 4:49 AM
> >> Subject: Asterisk-Users Digest, Vol 18, Issue 82
> >>
> >>
> >> > ------------------------------
> >> >
> >> > Message: 12
> >> > Date: Fri, 13 Jan 2006 11:52:20 +0200
> >> > From: Tzafrir Cohen <tzafrir at cohens.org.il>
> >> > Subject: Re: [Asterisk-Users] Zaptel issues
> >> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> >> > <asterisk-users at lists.digium.com>
> >> > Message-ID: <20060113095220.GB4729 at gadot.org.il>
> >> > Content-Type: text/plain; charset=us-ascii
> >> >
> >> > On Thu, Jan 12, 2006 at 09:39:18AM -0600, Mike Hammett wrote:
> >> >> On a side note:  When poking around, I noticed in the zaptel Makefile
> >> >> that there is a section talking about ztdummy automatically being
> >> >> included on 2.6 kernels.  Is this correct?
> >> >>
> >> >> On to the main topic:  Any ideas for troubleshooting this?
> >> >>
> >> >> [root at OpenVZ zaptel-1.2.1]# /etc/rc.d/init.d/zaptel start
> >> >> Loading zaptel framework:  FATAL: Error inserting zaptel
> >> >> (/lib/modules/2.6.8-022stab050.1/extra/zaptel.ko): Invalid module
> >> >> format
> >> >>                                                            [FAILED]
> >> >> Waiting for zap to come online...Error: missing /dev/zap!
> >> >>
> >> >>
> >> >> [root at OpenVZ libpri-1.2.1]# modprobe ztdummy
> >> >> WARNING: Error inserting zaptel
> >> >> (/lib/modules/2.6.8-022stab050.1/extra/zaptel.ko): Invalid module
> >> >> format
> >> >> WARNING: Error inserting zaptel
> >> >> (/lib/modules/2.6.8-022stab050.1/extra/zaptel.ko): Invalid module
> >> >> format
> >> >> FATAL: Error inserting ztdummy
> >> >> (/lib/modules/2.6.8-022stab050.1/extra/ztdummy.ko): Invalid module
> >> >> format
> >> >> FATAL: Error running install command for ztdummy
> >> >
> >> > Could you please provide the output of following:
> >> >
> >> >  which modprobe
> >> >  modprobe --version
> >> >
> >> > To make things simpler, do away with the stuff that the zaptel install
> >> > puts in /etc/modprobe.d/zaptel (or /etc/modprobe.conf ).
> >> >
> >> > (ztdummy needs no ztcfg run after it)
> >> >
> >> > Also, please provide the latest relevant kernel log messages:
> >> >
> >> >  dmesg | tail
> >> >
> >> > --
> >> > Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
> >> > http://tzafrir.org.il |                           | a Mutt's
> >> > tzafrir at cohens.org.il |                           |  best
> >> > ICQ# 16849755         |                           | friend
> >> >
> >> >
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation provided by Easynews.com --
> >>
> >> Asterisk-Users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >
> >
> > --
> > Facundo Ameal.
> > fameal<at>gmail<dot>com
> > Linux User #395088
> >
> > Open your mind, use open source.
> >
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


--
Facundo Ameal.
fameal<at>gmail<dot>com
Linux User #395088

Open your mind, use open source.

More information about the asterisk-users mailing list