[Asterisk-Users] Newer version of Zaptel with 1.0 branch of *

[Chris Earle (CBL)]

Has upgrading to the newer Zaptel allowed you to use the newer improvements
in it? (sorry if that was implied)

Thanks for the speedy reply


Chris


----- Original Message ----- 
From: "Adam Robins" <arobins at PharmaCentra.com>
To: "Chris Earle (CBL)" <cearle at cbltech.ca>; "Asterisk Users Mailing List -
Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Monday, January 23, 2006 5:01 PM
Subject: RE: [Asterisk-Users] Newer version of Zaptel with 1.0 branch of *


> I have done this successfully with Asterisk 1.07 and Zaptel 1.09 and
> 1.2.1 for the same reasons as you.
>
> However, if you ever need to go recompile Asterisk, then you will first
> need to recompile the old Zaptel, compile Asterisk and the new Zaptel
> again.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris
> Earle (CBL)
> Sent: Monday, January 23, 2006 4:41 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Newer version of Zaptel with 1.0 branch of *
>
> Is it possible to run the CVS-HEAD/Stable version of Zaptel (1.2
> whatever) with an older version of Asterisk? I'm running 1.09, but I was
> wondering if I could get at the newer echo cancellers like KB1 and MG2
> without upgrading to Asterisk 1.2?
>
>
> I'm going out on a limb here to try and fix a serious echo problem on a
> TDM
> + BT PSTN line in the UK
>
>
> Thanks for your suggestions everyone
>
>
> --
> Chris Earle
> System Solutions Specialist,
>
>
> --
> This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> The contents of this email message and any attachments are confidential
and are intended solely for addressee. The information may also be legally
privileged. This transmission is sent in trust, for the sole purpose of
delivery to the intended recipient. If you have received this transmission
in error, any use, reproduction or dissemination of this transmission is
strictly prohibited. If you are not the intended recipient, please
immediately notify the sender by reply email and delete this message and its
attachments, if any.
>
>
>
> -- 
> This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.
>


-- 
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.