[Asterisk-Users] chan_capi-cm and DID

[richard Coco]

Hi armin,

thx for the answer. I have connected the BRI on a
HiPazt4000 and i still have the same issue. So i think
i have a problem with my ISDN line. I will contact my
provider. May be a reset of the line will solve the
problem.

rich.

--- Armin Schindler <armin at melware.de> wrote:

> On Tue, 17 Jan 2006, richard Coco wrote:
> > Hi Armin,
> > 
> > thx for your feedback, but what do you mean with
> "Did
> > you load the card with config for DID on that
> port?"
> > 
> > I have loaded the modules with:
> > modprobe capi 
> > modprobe kernelcapi 
> > modprobe divacapi 
> > modprobe divas
> > 
> > and then loaded divactrl like this:
> > divactrl load -f ETSI
> > 
> > I suppose that this is ok (it works without did)?
> Or
> > have i forgotten something?
> 
> With 
>   divactrl load -f ETSI
> you load the card to PtMP (which is the default) on
> all four ports.
> Use
>   divactrl load -c 1 -SeparateConfig -u1
> where the '1' of -u1 means second port.
> E.g. -u is first port, -u1 -u2 -u3 is port 2,3,4.
> 
> When using -SeparateConfig, the X-extension is
> available
> for many options.
> 
> E.g., you can put port 3 and 4 into NT-mode, or even
> run another protocol
> (1TR6, JAPAN, QSIG,...) on other ports.
> 
> See
>   divactrl load -h
> for all options.
>  
> Armin
> 
> > thx in advance..
> > 
> > --- Armin Schindler <armin at melware.de> wrote:
> > 
> > > On Mon, 16 Jan 2006, richard Coco wrote:
> > > > Hi all,
> > > > 
> > > > i have asterisk 1.0.9 with an Eicon Diva 4bri
> and
> > > > chan_capi-cm-0.6. I have 2 NTBAs (one with did
> and
> > > one
> > > > without).
> > > > When using the one without did, i am able to
> place
> > > > outgoing and incoming calls. When i use the
> NTBAs
> > > with
> > > > did i have a layer 2 error.
> > > > 
> > > > Anyone an idea?
> > > 
> > > Did you load the card with config for DID on
> that
> > > port?
> > > What are your divactrl parameters? (Or do you
> use
> > > Eicon Package with xml based config?)
> > > 
> > > Armin 
> > >  
> > > >     -- Executing Dial("SIP/2004-9634",
> > > > "CAPI/g1/43XXXXXX") in new stack
> > > >        > data = g1/43XXXXXX
> > > >        > parsed dialstring: 'g1' '43XXXXXX' ''
> > > >        > capi request group = 2
> > > >        > parsed dialstring: 'g1' '43XXXXXX' ''
> > > >   == EICON: Call CAPI/EICON/43XXXXXX-6  
> > > (pres=0x00,
> > > > ton=0x00)
> > > > CONNECT_REQ ID=001 #0x000c LEN=0065
> > > >   Controller/PLCI/NCCI            = 0x1
> > > >   CIPValue                        = 0x10
> > > >   CalledPartyNumber               =
> <80>43XXXXXX
> > > >   CallingPartyNumber              = <00 80
> > > > 22>EyeBeam<22> <3c>2004<3e>
> > > >   CalledPartySubaddress           = default
> > > >   CallingPartySubaddress          = default
> > > >   BProtocol
> > > >    B1protocol                     = 0x1
> > > >    B2protocol                     = 0x1
> > > >    B3protocol                     = 0x0
> > > >    B1configuration                = default
> > > >    B2configuration                = default
> > > >    B3configuration                = default
> > > >   BC                              = default
> > > >   LLC                             = default
> > > >   HLC                             = default
> > > >   AdditionalInfo
> > > >    BChannelinformation            = <00 00>
> > > >    Keypadfacility                 = default
> > > >    Useruserdata                   = default
> > > >    Facilitydataarray              = default
> > > > 
> > > >     -- Called g1/43XXXXXX
> > > > CONNECT_CONF ID=001 #0x000c LEN=0014
> > > >   Controller/PLCI/NCCI            = 0x201
> > > >   Info                            = 0x0
> > > > 
> > > >     -- EICON: received CONNECT_CONF PLCI =
> 0x201
> > > > DISCONNECT_IND ID=001 #0x0011 LEN=0014
> > > >   Controller/PLCI/NCCI            = 0x201
> > > >   Reason                          = 0x3302
> > > > 
> > > > DISCONNECT_RESP ID=001 #0x0011 LEN=0012
> > > >   Controller/PLCI/NCCI            = 0x201
> > > > 
> > > >        > CAPI INFO 0x3302: Protocol error
> layer 2
> > > >   == EICON: CAPI Hangingup
> > > >   == EICON: Interface cleanup PLCI=0x201
> > > >   == No one is available to answer at this
> time
> > > > 
> > > > my capi.conf looks like:
> > > > [DID]
> > > > controller=1,2,3,4
> > > > isdnmode=did
> > > > incomingmsn=*
> > > > softdtmf=on
> > > > relaxdtmf=on
> > > > accountcode=
> > > > context=DID
> > > > echocancel=yes
> > > > ;echocancelold=yes
> > > > devices=2
> > > > group=1
> > > > 
> > > > 
> > > > 
> > > >
> __________________________________________________
> > > > Do You Yahoo!?
> > > > Tired of spam?  Yahoo! Mail has the best spam
> > > protection around 
> > > > http://mail.yahoo.com 
> > > >
> _______________________________________________
> > > > --Bandwidth and Colocation provided by
> > > Easynews.com --
> > > > 
> > > > Asterisk-Users mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > >   
> > >
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > 
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by
> Easynews.com
> > > --
> > > 
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   
> > >
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > 
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> > http://mail.yahoo.com 
> > _______________________________________________
> > --Bandwidth and Colocation provided by
> Easynews.com --
> > 
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com