[Asterisk-Users] Re: problems with a pri (E1)

[Xavier Gil]

>On 16 Jan 2006, at 11:05, Xavier Gil wrote:
>
>>
>> We run a asterisk 1.2.1 on a HP Proliant ML310, PIV 3Ghz 2 Mb L2  
>> cache, 1 Gb Ram. We have a TE210P
>> digium card configured for E1.
>>
>> This pbx has been running for almost a moth before giving this  
>> problems, we have called our telco
>> and seens that in their side all is ok. (Our telco is ONO- Spain)
>>
>> This is the zaptel.conf
>>
>> span=1,0,0,ccs,hdb3,crc4,yellow
>
>I think you want that to be:
>
>span=1,1,0,ccs,hdb3,crc4
>
>Meaning that you want to use the telco's clock as the primary timing
>source for the card.
>
>
>Anytime you connect a PRI to a 'real' telco you almost always want to
>use them as the timing source.
>
>
>What have you got on the other leg of the TE210P ?
>
>
>
>Tim.
We have changed span=1,0,0,ccs,hdb3,crc4,yellow -> to >> span=1,1,0,ccs,hdb3,crc4,yellow
without any change. We still have the same problems.

In the other leg is empty.

Xavi.


		
______________________________________________ 
LLama Gratis a cualquier PC del Mundo. 
Llamadas a fijos y móviles desde 1 céntimo por minuto. 
http://es.voice.yahoo.com