[Asterisk-Users] Recommend Fax Hardware for T1 PRI

[John Crew]

Any cheaper, equally reliable way to do this? 
Looks like a base Rhino channel bank with a 4
port FXS card will run me about $900.

---- Begin Original Message ----

From: Jerry Jones <jjones at danrj.com>
Sent: Wed, 11 Jan 2006 12:46:35 -0600
To: Asterisk Users Mailing List - Non-Commercial
Discussion<asterisk-users at lists.digium.com>
Subject: Re: [Asterisk-Users] Recommend Fax
Hardware for T1 PRI



On Jan 11, 2006, at 11:12 AM, C F wrote:

> You could use a 2 span T1 card from Digium and
plug one span into a
> channel bank, and have FXS ports on the CB for
the fax machines. With
> the latest firmwares from Digium these streams
are bridged internaly
> on the card, and don't even come on to the PCI bus.

I can vouch this works very well. I do so with a
4port card and 1 or  
2 Adits. All the traffic stays TDM and just works.

Although I am presently exploring using 24port
FXS devices peering  
with T1 gateway devices to replace this. Much
more flexibility.
_______________________________________________
--Bandwidth and Colocation provided by
Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  
http://lists.digium.com/mailman/listinfo/asterisk-users


---- End Original Message ----



Sent by Go2net Mail!