[Asterisk-Users] IAX & CallerID

[scott]

Good to know its not just me then.

Thanks
Scott
-----Original message-----
From: "Francesco Peeters (Asterisk)" francesco at fampeeters.com
Date: Wed, 11 Jan 2006 07:18:30 -0600
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
	asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] IAX & CallerID

> On Wed, January 11, 2006 7:52, scott said:
> > Hi All
> >
> > Apologises if this has been disussed and I missed it.
> >
> > My SetUp
> > I have a sip phone registered to an asterisk box (a1) in one location 1.
> > This phone dials an extension which is in another location, so a1  passes
> > the call via IAX to the other asterisk (a2) in location 2 which then dials
> > the local phone.
> >
> > My Problem
> > The caller ID setup in the sip.conf for the phone registered to a1 is not
> > passed via the IAX to a2 and is therefor not being displayed on the phone
> > in location2. The only way I can get the phone in location2 to display the
> > caller ID is to set the callerid in the user part in the iax.conf on a2.
> >
> > Hope this makes sense
> > Many thanks
> 
> It sure does, as I am examining exactly the same issue for my set up...
> 
> -- 
> F Peeters
>   PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
>   2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
>     Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
>   AMD Duron 1GHz - 1GB - * 1.2.1
>   2 Sweex HFC-PCI cards
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users