[Asterisk-Users] Re: TDM400 (TDM11B) configuration

[Dan Littlejohn]

On 1/9/06, Dan Littlejohn <dan.littlejohn at gmail.com> wrote:
> I have fixed this before, but I cannot for the life of me remember how I did it.
>
> I have a TDM400P with one fxo module and one fxs module.  I setup
> Asterisk @Home and everything works fine, except when I try and call
> out.  If I call out with a SIP phone it calls the zap extension and
> not the pstn line?  If I take the zap extension offhook and call with
> the SIP phone it dials out the pstn line fine.  I am not sure why the
> zap extension is being included in the group, but I cannot find where
> to change it in AMP or the .conf files.  Any help would be
> appreciated.
>
> ; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
> signalling=fxo_ks
> ; Note: this is an extension. Create a ZAP extension in AMP for Channel 1
> context=from-internal
> group=1
> channel => 1
>
> ; channel 2, WCTDM, inactive.
> ; channel 3, WCTDM, inactive.
> signalling=fxs_ks
> ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 4
> context=from-pstn
> group=0
> channel => 4
>
>
> Dan
>


Bad form to post to your own message, but I figured it out and thought
anyone else interested would want to know.

It is apparently some problem with how the zapata module loads.  I
switched the fxs and fso lines and all is well.  Maybe something is
inherited, etc.  Seems like a bug to me.

 signalling=fxs_ks
 ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 4
 context=from-pstn
 group=0
 channel => 4

 ; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
 signalling=fxo_ks
 ; Note: this is an extension. Create a ZAP extension in AMP for Channel 1
 context=from-internal
 group=1
 channel => 1

Dan