[Asterisk-Users] PRI problem

[Steve Totaro]

If you mean the call keeps ringing, then the reason why is you have no
timeout in your dial statement.  When there is no timeout the system
will never give up on line one so it can continue to the second
priority.

 

Thanks,

Steve

 

  _____  

From: Joseph Rothstein [mailto:jrothstein at comcentrixs.com] 
Sent: Sunday, January 08, 2006 5:48 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] PRI problem

 

Thanks for the suggestion, but I can't seem to get this to work for some
reason.

 

When I dial my zap channel it does not seem to go beyond the first
priority.

 

I have setup the following just as a test, but never see the output of
Noop:

 

exten => _0.,1,Dial(Zap/g1/${EXTEN:2},,f)

exten => _0.,2,Noop(${DIALSTATUS})

 

I'd appreciate any suggestions along these lines.

 

Regards,

Joe