[Asterisk-Users] Non-PRI T1

[Mark Phillips]

Are they configured for inbound calls? If so how?

Usually the telco sends the last 4 digits of the called phone number 
down the line. This means you'll need an exten=blah setup in the context 
that handles the T1.

Hope that helps.

Mark, G7LTT/KC2ENI
Randolph, NJ
http://www.g7ltt.com


David Sampson wrote:
> Hello –
> 
>  
> 
> I have a non-PRI T1 setup and have been making outgoing calls for 
> several months no problem.  I have Zapata.conf setup for fxs_ks on these 
> channels.  How do I take incoming calls on these same channels?  Do I 
> need to change the signaling?
> 
>  
> 
> Any help is appreciated.
> 
>  
> 
> Thank you,
> 
> 
> Dave
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users