[Asterisk-Users] 3RD REQUEST - Any Help Is Appreciated

[Steve Blair]

People don't usually respond with "I don't know". They just don't respond
unless they can help. This helps reduce the clutter on the list. And for the
record I do not have an answer to this issue.

casasterisk at valnet.com wrote:

>Is there a protocol I'm supposed to use here?  It seems that people are asking 100 questions a day and SOMEONE is helping them, and I've posted this three times and not even an "I Don't Know".
>
>My third repost:
>
>Ok, I've been trying to figure out why my A at H won't answer the lines when I can call out and the panel shows the call coming in - well something bizarre has happened. 
>I set up inbound routing to ring my extension if a call comes in - and my extension rings but when I pick it up I get a dial tone. The whole time after I answer I hear the phone I originated the call on just ring and ring and ring, even though I answer the IP phone.... 
>Ok, so then I set it to go to VM, and it does - but it's just a dial tone. 
>So, why would the originating phone ring and ring if the PBX is picking up and routing? And why would I get dial tone on the answering phone when the incoming call rings to it? 
>Bizarre! 
>Here is the real time status from CLI: 
>asterisk1*CLI> 
>-- Starting simple switch on 'Zap/2-1' 
>-- Executing SetVar("Zap/2-1", "FROM_DID=s") in new stack 
>-- Executing Answer("Zap/2-1", "") in new stack 
>-- Executing Wait("Zap/2-1", "0") in new stack 
>-- Executing Goto("Zap/2-1", "ext-local|*101|1") in new stack 
>-- Goto (ext-local,*101,1) 
>-- Executing Macro("Zap/2-1", "vm|101") in new stack 
>-- Executing Macro("Zap/2-1", "user-callerid") in new stack 
>-- Executing DBget("Zap/2-1", "AMPUSER=DEVICE//user") in new stack 
>-- DBget: varname=AMPUSER, family=DEVICE, key=/user 
>-- DBget: Value not found in database. 
>-- Executing DBget("Zap/2-1", "AMPUSERCIDNAME=AMPUSER//cidname") in new stack 
>-- DBget: varname=AMPUSERCIDNAME, family=AMPUSER, key=/cidname 
>-- DBget: Value not found in database. 
>-- Executing GotoIf("Zap/2-1", "1?5") in new stack 
>-- Goto (macro-user-callerid,s,5) 
>-- Executing NoOp("Zap/2-1", "Using CallerID ") in new stack 
>-- Executing Goto("Zap/2-1", "s-|1") in new stack 
>-- Goto (macro-vm,s-,1) 
>-- Executing VoiceMail("Zap/2-1", "u101") in new stack 
>-- Playing '/var/spool/asterisk/voicemail/default/101/unavail' (language 'en') 
>-- Playing 'vm-intro' (language 'en') 
>-- Playing 'beep' (language 'en') 
>-- Recording the message 
>-- x=0, open writing: /var/spool/asterisk/voicemail/default/101/INBOX/msg0000 format: wav49, 0x9f56790 
>-- x=1, open writing: /var/spool/asterisk/voicemail/default/101/INBOX/msg0000 format: wav, 0x9f73680 
>Any clues?
>
>
>___________________________________________________________
>Sent by ePrompter, the premier email notification software.
>Free download at http://www.ePrompter.com.
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>

-- 
  
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104  


voice: 215-573-8396 

       215-746-8001

fax: 215-898-9348    

sip:blairs at net.isc.upenn.edu