[Asterisk-Users] 3RD REQUEST - Any Help Is Appreciated

casasterisk at valnet.com casasterisk at valnet.com
Fri Jan 6 08:47:50 MST 2006


Is there a protocol I'm supposed to use here?  It seems that people are asking 100 questions a day and SOMEONE is helping them, and I've posted this three times and not even an "I Don't Know".

My third repost:

Ok, I've been trying to figure out why my A at H won't answer the lines when I can call out and the panel shows the call coming in - well something bizarre has happened. 
I set up inbound routing to ring my extension if a call comes in - and my extension rings but when I pick it up I get a dial tone. The whole time after I answer I hear the phone I originated the call on just ring and ring and ring, even though I answer the IP phone.... 
Ok, so then I set it to go to VM, and it does - but it's just a dial tone. 
So, why would the originating phone ring and ring if the PBX is picking up and routing? And why would I get dial tone on the answering phone when the incoming call rings to it? 
Bizarre! 
Here is the real time status from CLI: 
asterisk1*CLI> 
-- Starting simple switch on 'Zap/2-1' 
-- Executing SetVar("Zap/2-1", "FROM_DID=s") in new stack 
-- Executing Answer("Zap/2-1", "") in new stack 
-- Executing Wait("Zap/2-1", "0") in new stack 
-- Executing Goto("Zap/2-1", "ext-local|*101|1") in new stack 
-- Goto (ext-local,*101,1) 
-- Executing Macro("Zap/2-1", "vm|101") in new stack 
-- Executing Macro("Zap/2-1", "user-callerid") in new stack 
-- Executing DBget("Zap/2-1", "AMPUSER=DEVICE//user") in new stack 
-- DBget: varname=AMPUSER, family=DEVICE, key=/user 
-- DBget: Value not found in database. 
-- Executing DBget("Zap/2-1", "AMPUSERCIDNAME=AMPUSER//cidname") in new stack 
-- DBget: varname=AMPUSERCIDNAME, family=AMPUSER, key=/cidname 
-- DBget: Value not found in database. 
-- Executing GotoIf("Zap/2-1", "1?5") in new stack 
-- Goto (macro-user-callerid,s,5) 
-- Executing NoOp("Zap/2-1", "Using CallerID ") in new stack 
-- Executing Goto("Zap/2-1", "s-|1") in new stack 
-- Goto (macro-vm,s-,1) 
-- Executing VoiceMail("Zap/2-1", "u101") in new stack 
-- Playing '/var/spool/asterisk/voicemail/default/101/unavail' (language 'en') 
-- Playing 'vm-intro' (language 'en') 
-- Playing 'beep' (language 'en') 
-- Recording the message 
-- x=0, open writing: /var/spool/asterisk/voicemail/default/101/INBOX/msg0000 format: wav49, 0x9f56790 
-- x=1, open writing: /var/spool/asterisk/voicemail/default/101/INBOX/msg0000 format: wav, 0x9f73680 
Any clues?


___________________________________________________________
Sent by ePrompter, the premier email notification software.
Free download at http://www.ePrompter.com.





More information about the asterisk-users mailing list