[Asterisk-Users] Bizarre Answering Behavior

pdhales at optusnet.com.au pdhales at optusnet.com.au
Thu Jan 5 16:57:01 MST 2006


Can you make calls between SIP phones? It could be a phone config issue...

PaulH

----- Original Message ----- 
From: <casasterisk at valnet.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, January 06, 2006 1:50 AM
Subject: [Asterisk-Users] Bizarre Answering Behavior


> Ok, I've been trying to figure out why my A at H won't answer the lines when
I can call out and the panel shows the call coming in - well something
bizarre has happened.
> I set up inbound routing to ring my extension if a call comes in - and my
extension rings but when I pick it up I get a dial tone. The whole time
after I answer I hear the phone I originated the call on just ring and ring
and ring, even though I answer the IP phone....
> Ok, so then I set it to go to VM, and it does - but it's just a dial tone.
> So, why would the originating phone ring and ring if the PBX is picking up
and routing? And why would I get dial tone on the answering phone when the
incoming call rings to it?
> Bizarre!
> Here is the real time status from CLI:
> asterisk1*CLI>
> -- Starting simple switch on 'Zap/2-1'
> -- Executing SetVar("Zap/2-1", "FROM_DID=s") in new stack
> -- Executing Answer("Zap/2-1", "") in new stack
> -- Executing Wait("Zap/2-1", "0") in new stack
> -- Executing Goto("Zap/2-1", "ext-local|*101|1") in new stack
> -- Goto (ext-local,*101,1)
> -- Executing Macro("Zap/2-1", "vm|101") in new stack
> -- Executing Macro("Zap/2-1", "user-callerid") in new stack
> -- Executing DBget("Zap/2-1", "AMPUSER=DEVICE//user") in new stack
> -- DBget: varname=AMPUSER, family=DEVICE, key=/user
> -- DBget: Value not found in database.
> -- Executing DBget("Zap/2-1", "AMPUSERCIDNAME=AMPUSER//cidname") in new
stack
> -- DBget: varname=AMPUSERCIDNAME, family=AMPUSER, key=/cidname
> -- DBget: Value not found in database.
> -- Executing GotoIf("Zap/2-1", "1?5") in new stack
> -- Goto (macro-user-callerid,s,5)
> -- Executing NoOp("Zap/2-1", "Using CallerID ") in new stack
> -- Executing Goto("Zap/2-1", "s-|1") in new stack
> -- Goto (macro-vm,s-,1)
> -- Executing VoiceMail("Zap/2-1", "u101") in new stack
> -- Playing '/var/spool/asterisk/voicemail/default/101/unavail' (language
'en')
> -- Playing 'vm-intro' (language 'en')
> -- Playing 'beep' (language 'en')
> -- Recording the message
> -- x=0, open writing:
/var/spool/asterisk/voicemail/default/101/INBOX/msg0000 format: wav49,
0x9f56790
> -- x=1, open writing:
/var/spool/asterisk/voicemail/default/101/INBOX/msg0000 format: wav,
0x9f73680
> Any clues?
>
>
> ___________________________________________________________
> Sent by ePrompter, the premier email notification software.
> Free download at http://www.ePrompter.com.
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>




More information about the asterisk-users mailing list