[Asterisk-Users] TE110p and pri_cpe signalling not recognized

[pdhales at optusnet.com.au]

I have seen issues where people had edited the files in windows.

The hint is that Asterisk was complaining about having ^M in the config
files....

PaulH

----- Original Message ----- 
From: "stotaro" <stotaro at totarotechnologies.com>
To: <age at trackwell.com>; "Asterisk Users Mailing List - Non-Commercial
Discussion" <asterisk-users at lists.digium.com>
Sent: Friday, January 06, 2006 9:17 AM
Subject: Re: [Asterisk-Users] TE110p and pri_cpe signalling not recognized


> I had this problem and while not 100% sure.  I think the solution was
> whitespace at the end of the lines in the conf file.  Opened the file with
> vi, went to each line and hit end to make sure there were no extra spaces,
> there were, removed them, rebooted and issue went away.
>
>
> > Hi guys,
> >
> > I've been installing and configuring a TE110p card.  The compile and
> > install went very well.  I'm using this on FC4 and I compile with
> > linux26 as well checked I on the udev configs.
> >
> > zttool and ztcfg both indicate that the card is ready.
> >
> > But when I try to "load chan_zap.so" then I get the following
> >
> >
> > Unable to load module chan_zap.so
> > Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown
> > signalling method 'pri_cpe'
> > Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must
> > be specified before any channels are.
> > Jan  5 21:43:33 WARNING[6808]: loader.c:414 __load_resource:
> > chan_zap.so: load_module failed, returning -1
> >
> > My config is here below.
> >
> > TIA
> >
> > Arnar Gestsson
> >
> >
> > /etc/zaptel.conf
> >
> > span=1,1,0,ccs,hdb3,crc4
> >
> > loadzone = nl
> > loadzone=de
> > defaultzone=nl
> >
> > bchan=1-5,7-15,17-31
> > dchan=16
> >
> > /etc/asterisk/zapata.conf
> >
> > [trunkgroups]
> > trunkgroup => 1,16
> > spanmap => 1,1
> >
> > [channels]
> > language=en
> > context=default
> > switchtype=euroisdn
> > pridialplan=unknown
> > signalling=pri_cpe
> > ;rxwink=300
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=yes
> > usecallingpres=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > cancallforward=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=5.0
> > txgain=1.0
> > echotraining=yes
> > group=1
> > callgroup=1
> > pickupgroup=1
> > immediate=no
> > channel => 1-15,17-31
> >
> >
> >
> > -- 
> > Arnar Gestsson <age at trackwell.com>
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.371 / Virus Database: 267.14.13/221 - Release Date:
1/4/2006
> >
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>