[Asterisk-Users] Raw Hangup messages with IAX2?

[Mike McMullen]

>>
> 
> Hmzzz... That's not my problem though, so I quess I'll need to investigate
> further!  :-(
> 
> Thanks for the info tho!
> 
> -- 
> F Peeters
>  PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
>  2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
>    Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
>  AMD Duron 1GHz - 1GB - * 1.2.1
>  2 Sweex HFC-PCI cards
> _______________________________________________

When I googled on "asterisk raw hangup" I came across a few
postings regarding  the problem. They seemed to all point to
the wrong info/ip address being presented by the client's router/
firewall.

This is what made me go back and check again on the person's
router who swore "all was set correctly".

HTH,

Mike