[Asterisk-Users] Re: Start recording after call started

Francesco Peeters (Asterisk) francesco at fampeeters.com
Wed Jan 4 08:19:15 MST 2006


On Wed, January 4, 2006 15:45, Tomislav Parcina said:
> In article <003b01c610e2$b7596420$6400a8c0 at bluejay>,
> LJ.Shields at Verizon.net says...
>> In Asterisk v1.2.1 check the "featuremap" section of the "features.conf"
>> file.  You also need to add the "w" or "W" option to your "Dial" cmd
>> where
>> appropriate.  So with the feature mapping below pressing *1 would start
>> recording.
>>
>> [featuremap]
>> blindxfer => #1                ; Blind transfer, default is #
>> disconnect => *0               ; Disconnect
>> automon => *1                  ; One Touch Record
>> atxfer => *2                   ; Attended transfer
>
> I need to dail *1 to quickly. Can that be changed?
>
Try experimenting with this:

[general]
featuredigittimeout = 1000      ; Max time (ms) between digits for
                                 ; feature activation.  Default is 500

HTH!

-- 
F Peeters
  PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
  2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
    Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
  AMD Duron 1GHz - 1GB - * 1.2.1
  2 Sweex HFC-PCI cards



More information about the asterisk-users mailing list