[Asterisk-Users] Asterisk with HT 488 FXO

[Soner Tari]

Hi Pasqualotto,

Actually, I've seen your post on Asterisk-Users list yesterday, but I could
not understand back then. Now, I've checked your sip configuration again, I
think you make a mistake in "type" of sip account. I use "friend" not
"peer". I am not sure though.

Following is what I had in my sip.conf file for the FXO port of HT488:

[41]
username=41
type=friend
secret=<put your password here>
host=dynamic
context=<put your context here>
callerid="Outside-line" <41>
dtmfmode=inband
group=1
callgroup=1
pickupgroup=1

Of course, you should configure HT488 FXO sip account accordingly too. You
should make sure that HT488 registers with Asterisk.

Also read again the following thread:
http://lists.digium.com/pipermail/asterisk-users/2005-August/123548.html

Now, when you call 41 from another phone, you should be able to hear the
dial tone. And if you configured HT488 to answer incomming calls to FXO and
where they should be directed to ("Forward to VoIP" box), then you should be 
able to call in HT488 FXO and talk to Asterisk after a few rings. (HT488 
configuration is also very important, I don't know what settings you have 
there.)

I don't have a HT488 these days, so I cannot test your configurations,
sorry.

Soner

----- Original Message ----- 
From: "Pasqualotto Enrico" <pasqu at linux.it>
To: <asterisk-users at lists.digium.com>
Sent: Monday, February 27, 2006 9:54 PM
Subject: [Asterisk-Users] Asterisk with HT 488 FXO


> Hi, i have a HT 488 and I want using this like an FXO for Asterisk.
> I have find some configuration in the list archive & google but my HT with 
> these config not work.
>
> my sip.conf
>
> [HT-488]
> username=400
> type=peer
> secret=wowowow
> qualify=yes
> port=5062
> nat=no
> host=192.168.1.157
> fromuser=400
> disallow=all
> context=from-pstn
> allow=g711u
> allow=ulaw
> allow=alaw
>
> my sip debug:
> --------------------------------------------------------------
> SIP/2.0 200 OK
> Via: SIP/2.0/UDP 192.168.1.200:5060;branch=z9hG4bK669516e2;rport
> From: "Unknown" <sip:Unknown at 192.168.1.200>;tag=as073738f8
> To: <sip:192.168.1.157:5062>;tag=ebc40000a8e20000
> Call-ID: 4c2059f1770f97d80110fa427976d7e1 at 192.168.1.200
> CSeq: 102 OPTIONS
> User-Agent: Grandstream HT488 1.0.2.16
> Contact: <sip:400 at 192.168.1.157:5062;user=phone>
> Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE
> Supported: replaces
> Content-Length: 0
>
>
> --- (11 headers 0 lines)---
> Destroying call '4c2059f1770f97d80110fa427976d7e1 at 192.168.1.200'
> asterisk1*CLI>
> <-- SIP read from 192.168.1.157:5062:
> SIP/2.0 481 No Such Call
> Via: SIP/2.0/UDP 192.168.1.200:5060;branch=z9hG4bK669516e2;rport
> From: "Unknown" <sip:Unknown at 192.168.1.200>;tag=as073738f8
> To: <sip:192.168.1.157:5062>;tag=522400002a6bffff
> Call-ID: 4c2059f1770f97d80110fa427976d7e1 at 192.168.1.200
> CSeq: 102 OPTIONS
> User-Agent: Grandstream HT488 1.0.2.16
> Content-Length: 0
>
>
> --- (8 headers 0 lines)---
> Destroying call '4c2059f1770f97d80110fa427976d7e1 at 192.168.1.200'
> REGISTER 12 headers, 0 lines
> Reliably Transmitting (no NAT) to 192.168.1.157:5060:
> REGISTER sip:192.168.1.157 SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.200:5060;branch=z9hG4bK42700737;rport
> From: <sip:400 at 192.168.1.157>;tag=as558874a4
> To: <sip:400 at 192.168.1.157>
> Call-ID: 5308aeca055e74a23ebe819d52d03d26 at 127.0.0.1
> CSeq: 120 REGISTER
> User-Agent: Asterisk PBX
> Max-Forwards: 70
> Expires: 120
> Contact: <sip:s at 192.168.1.200>
> Event: registration
> Content-Length: 0
>
>
> ---
> Destroying call '5308aeca055e74a23ebe819d52d03d26 at 127.0.0.1'
> asterisk1*CLI>
> <-- SIP read from 192.168.1.157:5060:
> SIP/2.0 501 Not Implemented
> Via: SIP/2.0/UDP 192.168.1.200:5060;branch=z9hG4bK42700737;rport
> From: <sip:400 at 192.168.1.157>;tag=as558874a4
> To: <sip:400 at 192.168.1.157>;tag=3a7300003fa70000
> Call-ID: 5308aeca055e74a23ebe819d52d03d26 at 127.0.0.1
> CSeq: 120 REGISTER
> User-Agent: Grandstream HT488 1.0.2.16
> Content-Length: 0
>
> -------------------------------------------------------
>
> The register string ??
>
> Can anyone help me??
>
> Thanks
> -- 
> Pasqualotto Enrico
> email: pasqu at linux.it
> web: http://www.pasqualotto.org
>
> -----BEGIN GEEK CODE BLOCK-----
> Version: 3.12
> GIT d? s: a-- C+++ UL++++ P L++ E--- W++ N++ o K- w---
> O-- M V-- PS+ PE+ Y PGP- t--- 5 X R tv-- b+ DI- D+
> G e h++ r+ y+++++
> ------END GEEK CODE BLOCK------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users