[Asterisk-Users] fax receive using TDM400P

[Cosmin Prund]

How about this:

--- Results after 33 passes ---
Best: 100.000000 -- Worst: 99.987793 -- Average: 99.988163

Faxing is working just fine. Mabe it's mother board related?

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Anton Krall
> Sent: Tuesday, February 28, 2006 4:41 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] fax receive using TDM400P
> 
> Yep, been there, done that.
> 
> How about this results:
> 
> [root at voip asterisk]# /usr/src/zaptel-1.2.4/zttest  -v
> Opened pseudo zap interface, measuring accuracy...
> 
> 8192 samples in 8191 sample intervals 99.987793%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8191 sample intervals 99.987793%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8193 sample intervals 99.987793%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> 8192 samples in 8192 sample intervals 100.000000%
> --- Results after 15 passes ---
> Best: 100.000000 -- Worst: 99.987793 -- Average: 99.997559
> 
> Anything above 99.98 is good so.. Why isnt faxing working :(
> 
> |-----Original Message-----
> |From: asterisk-users-bounces at lists.digium.com
> |[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> |Rich Adamson
> |Sent: Tuesday, February 28, 2006 2:18 AM
> |To: Asterisk Users Mailing List - Non-Commercial Discussion
> |Subject: RE: [Asterisk-Users] fax receive using TDM400P
> |
> |
> |> Ok 1 for Debian, any Fedoras Core 3 out there?
> |
> |fc3, and it doesn't work.
> |
> |If you check the archives, this has all been discussed before.
> |The issue seems to be more oriented to the specific pci bus
> |implementation on the motherboard. You might also want to run
> |/usr/src/zaptel/zttest and read the archives on that as well.
> |
> |
> |_______________________________________________
> |--Bandwidth and Colocation provided by Easynews.com --
> |
> |Asterisk-Users mailing list
> |To UNSUBSCRIBE or update options visit:
> |   http://lists.digium.com/mailman/listinfo/asterisk-users
> |
> |
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users