[Asterisk-Users] Asterisk + WiFi Phones

[Cory Andrews]

Goksie - I have found the F3000 works fine with Asterisk, however, the 
general release of this phone has been pushed back several times by 
UTStarcom.  At present, we have none of these available.  I might suggest 
the Linksys WIP300 as an alternative.

Cory J Andrews
++++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
++++++++++++++
voice - 716.630.1555 X22
email - Cory at VOIPSupply.com
AIM - B2CORY
----- Original Message ----- 
From: "ADEGOKE ARUNA" <goksie at gmail.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" 
<asterisk-users at lists.digium.com>
Sent: Tuesday, February 28, 2006 6:49 AM
Subject: RE: [Asterisk-Users] Asterisk + WiFi Phones


> What is the outcome of this finding on f3000.
>
> goksie
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Cory Andrews
> Sent: Thursday, November 24, 2005 10:04 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Asterisk + WiFi Phones
>
> The F3000 is also a clamshell, "flip" type phone.  I should be receiving
> an eval unit shortly and will post my findings after we work it over in
> the lab.
>
> Cory Andrews
> Senior Partner
> +++++++++++
> VOIPSupply.com
> 454 Sonwil Drive
> Buffalo, NY 14225
> +++++++++++
> voice - 716.630.1555 X22
> email - Cory at VOIPSupply.com
> fax - 716.630.1548
>
>
>
> Luki wrote:
>
>>>UTStarCom has the F3000 coming in December, which will have according
>>>to their spec
>>>
>>>    * WEP (64 and 128 bit )/WPA/MD5 Auth
>>>    * Handover/Roaming between different AP and SSID
>>>
>>>
>>
>>So what else is different compared to the F1000? The 1000 also does
>>WEP 64/128 and WPA with the newest firmware. Not sure about MD5 auth,
>>but SIP nonce/MD5 response certainly is implemented.
>>
>>Roaming kind of works, but could be improved. In one place I made it
>>from 4th floor -> elevator -> lobby while on the phone and without any
>>noticeable dropouts (ulaw codec). But the building was covered with
>>access points, on average NetStumbler saw 6 at the same time. So it
>>works, but not always.
>>
>>Don't get me wrong, the phone does have issues and in my opinion is
>>not production quality, meaning it will freak out unexpectedly and
>>only a reboot helps, which hardly ever happens to any Sipura adapters
>>or phones. Hopefully the new 3.6 firmware performs better.
>>
>>Luki
>>_______________________________________________
>>--Bandwidth and Colocation sponsored by Easynews.com --
>>
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>