[Asterisk-Users] run with incorrect E1/T1 jumper settings

[Diyanat Ali]

a better way is to to load the  driver with all spans set to E1 by running

modprobe wcte11xp t1e1override=15

or edit wcte11xp.c and change 'static int t1e1override = -1;' to 'static int 
t1e1override = 15;'


Diyanat






>From: Robert Andersson <robert-aurora at telia.com>
>Reply-To: Asterisk Users Mailing List - Non-Commercial 
>Discussion<asterisk-users at lists.digium.com>
>To: asterisk-users at lists.digium.com
>Subject: [Asterisk-Users] run with incorrect E1/T1 jumper  settings
>Date: Tue, 28 Feb 2006 10:36:57 +0100
>Precedence: list
>
>Hi,
>
>I have installed an TE110P but forgot to change the jumper
>settings to E1. I don't have easy physical access to ther server
>at the moment so I wonder if it will be possible to run it without changing
>the jumper settings with a configuration like below or will it be
>impossible
>to use the card at all before I fix the jumper? I can't try it myself yet
>since the operator isn't ready yet, but I would like to know in advance
>if it is impossible.
>
>bchan=1-15,17-24
>dchan=16
>
>instead of
>
>bchan=1-15,17-31
>dchan=16
>
>best regards
>Robert
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users