[Asterisk-Users] S100U and TigerJet

asterisk at frameweb.it asterisk at frameweb.it
Fri Feb 24 07:12:17 MST 2006


Hi all, this is another post about this problem.
I installed from scratch a new Suse Linux  10.0, with latest stable
asterisk.
Moreover I add the lines to  /etc/udev/rules.d/50-udev.rules, in order to
let the driver create the /dev/zap.......

When I plug into usb port my TigerJet adapter, I see on /var/log/messages

Feb 24 14:55:02 srvlnx05 kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 2
Feb 24 14:55:03 srvlnx05 kernel: usbcore: registered new driver
snd-usb-audio
Feb 24 14:55:03 srvlnx05 kernel: zaptel: module not supported by Novell,
setting U taint flag.
Feb 24 14:55:03 srvlnx05 kernel: Zapata Telephony Interface Registered on
major 196
Feb 24 14:55:03 srvlnx05 kernel: wcusb: module not supported by Novell,
setting U taint flag.
Feb 24 14:55:03 srvlnx05 kernel: usbcore: registered new driver wcusb
Feb 24 14:55:03 srvlnx05 kernel: Wildcard USB FXS Interface driver
registered

while lsusb shows
Bus 001 Device 002: ID 06e6:831c Tiger Jet Network, Inc.
Bus 001 Device 001: ID 0000:0000

under /dev, I see "borning" /zap and children
srvlnx05:/etc # dir /dev/zap/

drwxr-xr-x   2 root     root          120 Feb 24 14:55 .
drwxr-xr-x  14 root     root        15720 Feb 24 14:55 ..
crw-rw----   1 asterisk asterisk 196, 254 Feb 24 14:55 channel
crw-rw----   1 asterisk asterisk 196,   0 Feb 24 14:55 ctl
crw-rw----   1 asterisk asterisk 196, 255 Feb 24 14:55 pseudo
crw-rw----   1 asterisk asterisk 196, 253 Feb 24 14:55 timer

but NO channel 01 al all.
I would like to know if anybody
1) ever succeded in having this configuration up and running.
2) ever succeded in having this configuration up and running with a *TRUE*
S100U adapter from Digium.
3) If 2 is true *WHERE* it could be possible to buy this true adapter: on
digium shop I was not able to find it.

My opinion is that it could be an issue related to the operating system: I
think I should do something similar to what I did on
 /etc/udev/rules.d/50-udev.rules in order to allow the creation of
usb-related devices under /dev/zap. Unfortunately
I don't know anything about Linux kernel enumeration process. Also, does
exist any debugging tool for wcusb ?
Wcusb is up and running, is the only in the system ( I removed the wcusb.ko
natively present under the /extra directory)
lsmod | grep wcu shows:

srvlnx05:~ # lsmod | grep wcu
wcusb                  19104  0
zaptel                187268  1 wcusb
usbcore               112512  5 wcusb,snd_usb_audio,snd_usb_lib,uhci_hcd


thank's all for attention.
Andrea


Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.

Visitate il sito http://www.frameweb.it




More information about the asterisk-users mailing list