[Asterisk-Users] Polycom IP601 Question

[C F]

What does the dialplan for the Polyocm 601 (the one the phone uses,
not Asterisk) look like?
You can see if it's a polycom or asterisk thing, by enabling sip
debug, and watch what is coming in from the Polycom. if nothing is
coming then it's the Polycom doing it.

On 2/23/06, Kevin Smith <kevin.smith at mercury.net> wrote:
> Hey everyone, I haven't seen an issue quite like mine, so I am hoping
> anyone who used the Polycom 601's may have an idea.
>
> We are going to be switching our office over to Asterisk. All the phones
> are going to be 601's, I am going to set up a boot server, but for now I
> am just going to test everything on one phone. My question is I have the
> phone registered in Asterisk (phone icon on the polycom is black), but I
> cannot make any calls. I tried to dial the extension shown in the
> extensions.conf file and I just get a busy signal. However, if I plug in
> an old budgetone 100 with the same settings, it works just fine. Any ideas?
>
> Also, when setting up a boot sever, the phone updates the log entries
> and there is a cfg file for the mac address of the phone, but during a
> reboot it cannot connect to the bootserver. Do I need to have the
> sip.ld, etc, files up there for it to work properly?
>
> Any suggestions would be greatly appreciated.
>
> Here is the sip.conf file
>
> [test]
> type=friend
> secret=blahpoly
> insecure=yes
> host=dynamic
> qualify=500
> nat=no
> mailbox=testmailbox
> callerid=Yourname <test>
> conext=local
> disallow=all
> allow=ulaw
> progressinband=no
>
> here is the local section of the dial plan.
> exten => 850,1,Goto(Mercury-Network,850,1)
> exten => 888,1,VoiceMailMain(@Mercury-Network-Emp)
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>