[Asterisk-Users] Is anyone using hinting?

[Stephan Seitz]

Hi!

I'm trying to get the leds working on my snom phones (320/360).
Hinting rules are added to the extensions.conf, the function keys of the
phones are programmed. When I start the asterisk and then the phones, I
see the following:

asterisk*CLI> show hints
   -= Registered Asterisk Dial Plan Hints =-
  462                 : SIP/462               State:Idle     Watchers  0
  460                 : SIP/460               State:Idle     Watchers  1
  407                 : SIP/407               State:Idle     Watchers  0
  406                 : SIP/406               State:Idle     Watchers  1
  404                 : SIP/404               State:Idle     Watchers  1
  401                 : SIP/401               State:Idle     Watchers  2
----------------
- 6 hints registered

asterisk*CLI> sip show subscriptions
Peer             User        Call ID      Extension        Last state     Type 
10.10.30.102     406         3c267009c35  460              Idle           dialog-info+xml
10.10.30.102     406         3c267009c0d  401              Idle           dialog-info+xml
10.10.30.102     406         3c267009c0d  404              Idle           dialog-info+xml
10.10.30.103     404         3c26700972b  406              Idle           dialog-info+xml
10.10.30.103     404         3c267009704  401              Idle           dialog-info+xml
5 active SIP subscriptions

I would say, everything looks fine.

Now 404 calls 401. Since 406 watches both numbers, it gets two notify
messages from the asterisk, but the message says "terminated", not
"ringing". And this only works once. If 404 calls 401 again, no messages
are sent.

So, what I have to do to get subscriptions working?

I'm using Asterisk 1.2.4 (Debian unstable) with Bristuff.

Shade and sweet water!

	Stephan

-- 
Good judgement comes from experience,
and experience comes from bad judgement
		-- Jim Horning