[Asterisk-Users] NEED COMMENT ON USING FEDORA CORE 3

[Technical Support]

We've setup some FC3 systems with T1 at 100% - no problems.  As noted below,
I suspect other processes (or lack of computing power) may be causing your
issues.  Even things like turning off the gui (run level 3) can make a big
improvement.

MD

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rich Adamson
Sent: Tuesday, February 21, 2006 2:51 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] NEED COMMENT ON USING FEDORA CORE 3


> Can somebody share his experience with me in using fedora core 3 as 
> asterisk server using quad port card (e1/pri) at full capacity.

Runs fine and is very stable.  "Full capacity" is 100% dependent on exactly
what asterisk is doing (eg, transcoding), the PC hardware, etc, and has
nothing to do with fc3.



_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users