[Asterisk-Users] Outbound Routing does not use Multiple Trunks

[Nate List]

Mimmus,  It looks like this took care of the problem. 

Thanks for your help,
Nate

Mimmus wrote:
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com 
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>> Nate List
>> Sent: Tuesday, February 21, 2006 7:17 PM
>>
>> ...
>> In my Outbound Routing I have the Trunk Sequence set up so that 0 is
>> Zap/1-1 and 1 is ZAP/2-1  What I see is that when Trunk 
>> Sequence 0 is full, it does not open Trunk Sequence 1.  
>>     
>
> Peraphs this bug in AMP:
>
> ###############################################################
> Max Channels Bug Remains. A bug has been reported because of a deprecated
> command that makes Asterisk at Home's calculation of maximum channels invalid.
> To fix it, goto AMP->Maintenance->Config
> Edit->extensions.conf->macro-dialout-trunk and comment out line s,7 so that
> it looks like this:
>
> ;exten => s,7,CheckGroup(${OUTMAXCHANS_${ARG1}})
>
> Then insert a new line s,7 just below it which looks like this:
>
> exten => s,7,GotoIf($[ ${GROUP_COUNT()} > ${OUTMAXCHANS_${ARG1}} ]?108)
>
> Then click the Update button and reload Asterisk to activate the change.
> ###############################################################
>
> [from http://mundy.org/blog/index.php?p=112]
>
> Keep me informed if this solves your problem.
>
> Bye
> Mimmus
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060221/ff60d6a7/attachment.htm