[Asterisk-Users] Asterisk start errors with TDM2413E
duane.pudenz at shastaindustries.com
duane.pudenz at shastaindustries.com
Mon Feb 20 11:32:44 MST 2006
I do not think so by reading the documentation however I have changed the
settings and still get the same error when starting Asterisk
Best regards,
Duane Pudenz
Network Infrastructure Manager
Shasta Industries
----- Message from <f6hqz-m at hamwlan.net> on Mon, 20 Feb 2006 07:08:05
+0100 -----
To:
"'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>
Subject:
RE : [Asterisk-Users] Asterisk start errors with TDM2413E
Hi,
I believe that you have inverted fxo_ks and fxs_ks into your zapata.cong
file "signaling=" declaration...
Invert and redo the tests.
Good Luck !
Francois BERGERET,
France.
-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de
duane.pudenz at shastaindustries.com
Envoyé : lundi 20 février 2006 04:34
À : asterisk-users at lists.digium.com
Objet : [Asterisk-Users] Asterisk start errors with TDM2413E
I get the following errors when starting Asterisk.
== Parsing '/etc/asterisk/zapata.conf': Found
Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to
specify channel 1: No such device
Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open
channel 1: No such device
here = 0, tmp->channel = 1, channel = 1
Feb 19 21:14:35 ERROR[10440]: chan_zap.c:10264 setup_zap: Unable to
register channel '1'
Feb 19 21:14:35 WARNING[10440]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1
Feb 19 21:14:35 WARNING[10440]: loader.c:554 load_modules: Loading
module chan_zap.so failed!
[root at astrk1-phx ~]# Ouch ... error while writing audio data: :
Broken pipe
Software versions
asterisk-1.2.3
asterisk-addons-1.2.1
asterisk-perl-0.08
asterisk-sounds-1.2.1
libpri-1.2.2
zaptel-1.2.4
Output from modprobes
[root at astrk1-phx asterisk]# modprobe -v zaptel
insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko
[root at astrk1-phx asterisk]# modprobe -v wctdm24xxp
install /sbin/modprobe --ignore-install wctdm24xxp && /sbin/ztcfg
insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko
**** This takes at least 10 seconds to come back to a prompt ****
ztcfg output
[root at astrk1-phx asterisk]# ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Slaves: 08)
Channel 09: FXS Kewlstart (Default) (Slaves: 09)
Channel 10: FXS Kewlstart (Default) (Slaves: 10)
Channel 11: FXS Kewlstart (Default) (Slaves: 11)
Channel 12: FXS Kewlstart (Default) (Slaves: 12)
Channel 13: FXS Kewlstart (Default) (Slaves: 13)
Channel 14: FXS Kewlstart (Default) (Slaves: 14)
Channel 15: FXS Kewlstart (Default) (Slaves: 15)
Channel 16: FXS Kewlstart (Default) (Slaves: 16)
16 channels configured.
zaptel.conf
fxoks=1-4
fxsks=5-16
defaultzone=us
loadzone=us
zapata.conf
[channels]
signalling=fxo_ks
echocancel=yes
echocancelwhenbridged=yes
usecallerid=yes
context=outstation
channel=> 1-4
signalling=fxs_ks
echocancel=yes
echocancelwhenbridged=yes
usecallerid=yes
group=2
context=incomingpstn
channel=> 5-16
Best regards,
Duane Pudenz
Network Infrastructure Manager
Shasta Industries
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060220/5f466819/attachment.htm
More information about the asterisk-users
mailing list