[Asterisk-Users] MixMonitor and command

[Alex Barnes]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of BJ Weschke
> Sent: 17 February 2006 22:17
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] MixMonitor and command
> 
> On 2/17/06, Alex Barnes <abarnes at ubiquitysoftware.com> wrote:
> > Has anyone had any success using the MixMonitor() plus "command" as
> > nothing I have tried works.
> >
> > I am using 1.2.1 I did google the archive but couldn't see any
mention
> > of anyone using this.  What I am hoping to do is run a macro on
hangup,
> > current method I am using seems to miss some calls 5% of calls fail
to
> > mix / convert to mp3 etc.  Was hoping that MixMonitor would fix
this.
> >
> >
> > exten => s,n,MixMonitor(${CALLDIR}${CALLFILENAME}.wav||System(touch
> > /tmp/test${UNIQUEID}))
> >
> > exten => s,n,Answer
> > exten => s,n,SayDigits(1234)
> > exten => s,n,StopMonitor()
> > exten => s,n,Hangup()
> >
> >
> > Output:
> >
> > -- Executing MixMonitor("Zap/1-1",
> > "/tmp/callrec/20060217-212722-1-IN.wav||System(touch
> > /tmp/test1140211642.11373)") in new stack
> >    -- Executing Answer("Zap/1-1", "") in new stack
> >    -- Executing SayDigits("Zap/1-1", "1234") in new stack
> >    -- Playing 'digits/1' (language 'en')
> >  == Begin MixMonitor Recording Zap/1-1
> >    -- Playing 'digits/2' (language 'en')
> >    -- Playing 'digits/3' (language 'en')
> >    -- Playing 'digits/4' (language 'en')
> >    -- Executing StopMonitor("Zap/1-1", "") in new stack
> >    -- Executing Hangup("Zap/1-1", "") in new stack
> >  == Spawn extension (macro-test-script, s, 14) exited non-zero on
> > 'Zap/1-1' in macro 'test-script'
> >  == Spawn extension (from-outside-547551-tl-allhours, s, 1) exited
> > non-zero on 'Zap/1-1'
> >  == End MixMonitor Recording Zap/1-1
> >  == Executing [System(touch /tmp/test1140211642.11373)]
> >    -- Hungup 'Zap/1-1'
> >
> >
> > However listing /tmp reveals no files.  Running macros that only
print
> > NoOp's don't work either.
> >
> 
>  Alex -
> 
>  The command is a system command already that is spawned by
> MixMonitor. It's not the command you would expect to run from within a
> dial plan itself.
> 
> --
> Bird's The Word Technologies, Inc.
> http://www.btwtech.com/
> _______________________________________________


Thanks very much works like a charm now.

I will add this to the WIKI.

Cheers

Alex


Information contained in this e-mail and any attachments are intended for the use of the addressee only, and may contain confidential information of Ubiquity Software Corporation.  All unauthorized use, disclosure or distribution is strictly prohibited.  If you are not the addressee, please notify the sender immediately and destroy all copies of this email.  Unless otherwise expressly agreed in writing signed by an officer of Ubiquity Software Corporation, nothing in this communication shall be deemed to be legally binding.  Thank you.