[Asterisk-Users] configure TE205P on asterisk@home

[nik600]

for example, now i've set this in /etc/zaptel.conf

span=1,0,0,ccs,hdb3,crc4,yellow
span=2,0,0,ccs,hdb3,crc4,yellow

bchan = 1-15, 17-31
dchan = 16
bchan = 32-46,48-62
dchan = 47

loadzone        = it
defaultzone     = it

if i try
[root at asterisk1 ~]# ztcfg -vvv

Zaptel Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
Channel 32: Clear channel (Default) (Slaves: 32)
Channel 33: Clear channel (Default) (Slaves: 33)
Channel 34: Clear channel (Default) (Slaves: 34)
Channel 35: Clear channel (Default) (Slaves: 35)
Channel 36: Clear channel (Default) (Slaves: 36)
Channel 37: Clear channel (Default) (Slaves: 37)
Channel 38: Clear channel (Default) (Slaves: 38)
Channel 39: Clear channel (Default) (Slaves: 39)
Channel 40: Clear channel (Default) (Slaves: 40)
Channel 41: Clear channel (Default) (Slaves: 41)
Channel 42: Clear channel (Default) (Slaves: 42)
Channel 43: Clear channel (Default) (Slaves: 43)
Channel 44: Clear channel (Default) (Slaves: 44)
Channel 45: Clear channel (Default) (Slaves: 45)
Channel 46: Clear channel (Default) (Slaves: 46)
Channel 47: D-channel (Default) (Slaves: 47)
Channel 48: Clear channel (Default) (Slaves: 48)
Channel 49: Clear channel (Default) (Slaves: 49)
Channel 50: Clear channel (Default) (Slaves: 50)
Channel 51: Clear channel (Default) (Slaves: 51)
Channel 52: Clear channel (Default) (Slaves: 52)
Channel 53: Clear channel (Default) (Slaves: 53)
Channel 54: Clear channel (Default) (Slaves: 54)
Channel 55: Clear channel (Default) (Slaves: 55)
Channel 56: Clear channel (Default) (Slaves: 56)
Channel 57: Clear channel (Default) (Slaves: 57)
Channel 58: Clear channel (Default) (Slaves: 58)
Channel 59: Clear channel (Default) (Slaves: 59)
Channel 60: Clear channel (Default) (Slaves: 60)
Channel 61: Clear channel (Default) (Slaves: 61)
Channel 62: Clear channel (Default) (Slaves: 62)

62 channels configured.

ZT_CHANCONFIG failed on channel 50: No such device or address (6)

it seeems that my card has only 50 channel, as a T1, where have i to
say the system that this is a E1 card and not a T1?

thanks