[Asterisk-Users] PRI indications.

[Mark Edwards]

Hi.

I think it is something to do with your priindication= setting.

I may be wrong, but if I was you I would try priindication=inband

Cheers,

Mark

-----Original Message-----
From: Adam Rybak [mailto:arybak at radiowy.net] 
Sent: Tuesday, 6 December 2005 9:01 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] PRI indications.

Hello,

    i have succesfullu setup asterisk with Sangoma E1 card, evrything works
well
but i don't know how to pass indications from telco switch to the user -
when
users call bad number telco switch shuld talk "unallocated number" but its
only
send PRI_CAUSE 1. How to pass voice indications thru asterisk to clients?

My /etc/zaptel.conf:
span=1,0,0,CCS,HDB3,CRC4
dchan=16
bchan=1-10
alaw=1-10
loadzone=pl
defaultzone=pl

My /etc/asterisk/zapata.conf:
[channels]
language=en
context=from-pstn
switchtype=euroisdn
signalling=pri_cpe
pridialplan=local
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=no
cancallforward=no
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
priindication=outofband
group = 1
channel => 1-10


Regards,
Adam Rybak
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users