[Asterisk-Users] PRI to PRI not passing callerid

[Andres]

Mark Farver wrote:

> I must be doing something stupid, but I can't figure it out.
>
> I have three PRI lines connected to Asterisk, one from the phone 
> company, and two more connected to PBXs.  Asterisk uses the incoming 
> DID information to decide which PBX to route the call to.  Should be 
> simple.
>
> Asterisk is clearly getting the caller id info from the phone company:
>    -- Accepting call from '512345xxxx' to '039' on channel 0/3, span 3
>
> But the PBXs upstream never seem to get callerid from asterisk.  I 
> believe the PBX's are configured correctly, since if they are plugged 
> into the phone company PRI directly they handle caller id correctly.
>
> It seems like I am missing something in my zapata.conf, but I'm not 
> sure from reading the docs what it is (since I thought caller id info 
> was inserted by default)
>
You can enable debug on the PBX spans and see if the caller id is being 
sent in the SETUP message.

>
>


-- 
Andres
Technical Support
http://www.telesip.net