[Asterisk-Users] 911 and ISDN PRI

[Mark Phillips]

I dunno about your provider but I know that 2 of my 3 MCI PRI circuits 
have no 911 abilities. MCI tells me this is becasue I have no local 
dialing plan on them.

Mark, G7LTT/KC2ENI
Randolph, NJ
http://www.g7ltt.com


Michael Collins wrote:
> 911 **should** work on a PRI.  If you are getting a hangup and you don’t 
> see a valid hangupcause, it might be best to get your carrier on the 
> line and have them monitor the circuit while you dial 911.  They might 
> be able to tell you what the problem is.
> 
>  
> 
> -MC
> 
>  
> 
> ------------------------------------------------------------------------
> 
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Joe Pukepail
> *Sent:* Tuesday, February 07, 2006 10:10 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [Asterisk-Users] 911 and ISDN PRI
> 
>  
> 
> Does asterisk support this?  I have a location that I planned to only 
> put a PRI line, but testing 911 (I called them first), I just get a 
> hangup.  Does 911 normally work over a PRI line?  Anything special I 
> have to setup in asterisk?
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users