[Asterisk-Users] DTMF Sporadicaly Being Generated

Kevin Collins kcollins at itcc.com
Tue Feb 7 06:26:14 MST 2006


Any More news on this from Kevin ? 



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mark Hulber
Sent: Saturday, February 04, 2006 8:41 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] DTMF Sporadicaly Being Generated

Good to know. 

I was able to play around and get it mostly working but I'm still not able
to get DTMF working with Jitterbuffer ON for IAX although I previously could
at least with some providers.

I had to define my SIP extensions to use INBAND and set the Sipura devices
to also use INBAND and not process INFO or AVT.  I also noticed I was using
dtmf= instead of dtmfmode= which may or may not be in my imagination that
the latter works better (or at all).

Now at least people can listen to voicemail and authenticate a remote
conference call using the same device.

MARK.

Rob Thomas wrote:
> To quote Kevin:
>
> DTMF handling in the trunk is in a state of flux right now. It won't 
> be resolved until this weekend.
>
> Don't use SVN for a production system, it's lots broken right now. If 
> you really must, stick with r8786 for a while.
>
> --Rob
>
>
>   
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- 
>> bounces at lists.digium.com] On Behalf Of Mark Hulber
>> Sent: Sunday, 5 February 2006 10:21 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [Asterisk-Users] DTMF Sporadicaly Being Generated
>>
>> I've been having horrible DTMF problems lately on from Sipura ATAs to 
>> ZAP and IAX.  It's primarily with repeated digits.  I'm starting to
>>     
> move
>   
>> my connections to SIP until I can get it all figured out.  Other than 
>> updating to the newest SVN trunk I haven't made changes on my end 
>> that should have caused this.
>>
>> I've already put some of my IAX debug on a bug report relating to
>>     
> double
>   
>> dtmf with Jitterbuffer enabled.
>>
>> MARK.
>>
>> Kevin P. Fleming wrote:
>>     
>>> Michael L. Young wrote:
>>>
>>>       
>>>> I have a TE411P card in my * box. I am running FC4 x86_64. I used
>>>>         
> to
>   
>>>> have
>>>> two TE110 cards in the same box that worked without any problems.
>>>>         
> Since
>   
>>>> changing to the TE411P cards, I am getting random DTMF tones being 
>>>> produced on a bridged connection through the same Channel Bank that 
>>>> I was
>>>>         
> using
>   
>>>> before upgrading to the TE411P.
>>>>         
>>> This is a known problem, been discussed on the lists many times. You 
>>> should contact Digium Support, since you just purchased a Digium
>>>       
> card.
>   
>>> They are best equipped to handle issues related to Digium hardware.
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> Asterisk-Users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>       
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>     
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list