[Asterisk-Users] TDM04B FXO Asterisk@Home

[John Jensen]

Hi,
The magical incarnation is:
0. Fix /etc/udev./rules.d/50-udev.rules if it has been banged up by
yum.
1. "rebuild_zaptel"
2. "reboot"
3. "genzaptelconf"
4. "reboot"

That should do the job. There are more elegant ways than reboot'ing ...
but wtf.

BTW. A at H 2.5 is out now. It includes some important bugfixes so
consider that instead.

Also check out these links:
http://mundy.org/blog/index.php?p=112
http://asteriskathome.sourceforge.net/handbook/
http://members.optusnet.com.au/~bsharif/asterisk/AsteriskDumbMeGuide.htm


/John
>>> kevin.ling at amphenol.com.tw 02/07/06 11:06 am >>>
Hi, 
 
In my remember. The AAH will automatic config the TDM04B card. try the
CLI
command "zap show channels" 
 
regards,
kevin

  _____  

From: asterisk-users-bounces at lists.digium.com 
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Nelson
Granados
Sent: Tuesday, February 07, 2006 7:18 AM
To: asterisk-users at lists.digium.com 
Subject: [Asterisk-Users] TDM04B FXO Asterisk at Home


I would like to install a TDM04B with Asterisk at Home 2.4 and
Asterisk at Home
1.5
but I didn't find documentation about this installation.
 
Thanks in advance,
 
Nelson