[Asterisk-Users] TE405p -- loopback for the phone company?

[Tim Connolly]

I wonder if Digium has any intentions of fixing this. I brought this to
their attention shortly after purchasing a pair of TE411's. You can issue a
loopup on span 2 only to get a message saying "looping span1" which is to
say, a bit scary when you only have two active PRI and one is already down
for testing...
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin P.
Fleming
Sent: Wednesday, January 11, 2006 9:45 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TE405p -- loopback for the phone company?

Eric Lyons wrote:

> I got zttool running and selected "loop" on the interface, but it 
> didn't seem to do what they wanted (nor could I tell that it did 
> anything at all).  Many googles for zaptel and loop didn't turn up
anything useful.

This is a bug that needs to be fixed; currently the dual-/quad-span drivers
to not respond to remote loop-up requests, nor do they have any mode to loop
data back towards the network.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users