[Asterisk-Users] Analog with channel bank - Inbound works, outbound doesn't

[C F]

Looks like  channel 25 is not the one hooked up to your POTS, when an
incoming call arrives, what channel does the CLI report?


On 2/1/06, james.texter at cox.net <james.texter at cox.net> wrote:
> Thanks for the reply.  I have tried adding anywhere between 1 and 6 w's to the dial string, but still no luck.  I hooked up and listened on the line when the call went out, and never heard any DTMF's.  I'm sure this must be something simple, I just can't seem to figure out for the life of me what it is.  What other information can I provide to help sort this out?
>
> Thanks again,
> James
>
> ------------------------------
> You could insert a pause by adding a w before the number to be dialed,
> like this:
> Dial(zap/25/w1234567890) iirc each w puts a 500ms pause.
>
>
> On 1/30/06, james.texter at cox.net <james.texter at cox.net> wrote:
> > > I am experimenting with an asterisk setup in my office.  The last bit I have to test is working with analog lines.  I have TE411p digium card, with an ISDN line plugged into the first, a channel bank plugged into the second port, and the last two ports empty.  I have the following setup in my zaptel.conf:
> > >
> > > span=1,1,0,esf,b8zs
> > > bchan=1-23
> > > dchan=24
> > >
> > > span=2,0,0,d4,ami
> > > fxsks=25
> > >
> > > And in zapata.conf, I have:
> > > group=2
> > > language=en
> > > context=from-pstn
> > > signalling=fxs_ks
> > > channel=>25
> > >
> > > I have one analog line plugged in for testing.  If I dial that analog number, the inbound call arrives, and it works great.  However, when I place an outbound call, I get the following output:
> > > -- Called g2/5148346
> > > -- Zap/25-1 answered SIP/412-9b72
> > >
> > > However, my number never rings.  After about 30 seconds, I get a message saying my call could not be completed as dialed.  Almost like it didn't get all of the digits.  Is there a way to inject a pause before dialing?  Any other thoughts?  Any help is greatly appreciated.
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>