[asterisk-users] Help with SUSE 10.2 and Sangoma A104D

[Josué Conti]

Hi all, as good?
I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 ,
sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4
But it is not compiling drivers of the Sangoma, why udev's for board in
"/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I
install a board TE110P Digium, udev's is created and asterisk functions
perfectly. : )
This mine motherboard, has a NIC Gbps and if I leave qualified, the A104D
not recognized for motherboar, if I disable the NIC Gbps, through lspci, I
identify the A104D.
But report this error in compiling the wanpipe (./Setup install)
WANPIPE DRIVER COMPILE LOG
Fri Dec 22 01:19:40 BRST 2006
-----------------------------------
make -C /lib/modules/2.6.18.2-34-default/build
SUBDIRS=/usr/src/wanpipe/kdrvtmp CC=gcc KBUILD_VERBOSE=0 modules
make[1]: Entering directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make -C ../../../linux-2.6.18.2-34 O=../linux-2.6.18.2-34-obj/i386/default
modules
  CC [M]  /usr/src/wanpipe/kdrvtmp/sdladrv_src.o
  CC [M]  /usr/src/wanpipe/kdrvtmp/sdladrv_fe.o
/usr/src/wanpipe/kdrvtmp/sdladrv_fe.c:106: warning: 'sdla_te1_write_fe'
defined but not used
/usr/src/wanpipe/kdrvtmp/sdladrv_fe.c:141: warning: 'sdla_te1_read_fe'
defined but not used
/usr/src/wanpipe/kdrvtmp/sdladrv_fe.c:219: warning:
'sdla_shark_te1_write_fe' defined but not used
/usr/src/wanpipe/kdrvtmp/sdladrv_fe.c:292: warning: 'sdla_shark_te1_read_fe'
defined but not used
/usr/src/wanpipe/kdrvtmp/sdladrv_fe.c:471: warning:
'sdla_shark_analog_write_fe' defined but not used
  LD [M]  /usr/src/wanpipe/kdrvtmp/sdladrv.o
  Building modules, stage 2.
  MODPOST
  CC      /usr/src/wanpipe/kdrvtmp/sdladrv.mod.o
  LD [M]  /usr/src/wanpipe/kdrvtmp/sdladrv.ko
make[1]: Leaving directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make -C /lib/modules/2.6.18.2-34-default/build
SUBDIRS=/usr/src/wanpipe/kdrvtmp CC=gcc KBUILD_VERBOSE=0 modules
make[1]: Entering directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make -C ../../../linux-2.6.18.2-34 O=../linux-2.6.18.2-34-obj/i386/default
modules
  CC [M]  /usr/src/wanpipe/kdrvtmp/wanmain.o
/usr/src/wanpipe/kdrvtmp/wanmain.c: In function 'wanrouter_ioctl':
/usr/src/wanpipe/kdrvtmp/wanmain.c:546: error: 'struct inode' has no member
named 'i_private'
make[4]: *** [/usr/src/wanpipe/kdrvtmp/wanmain.o] Error 1
make[3]: *** [_module_/usr/src/wanpipe/kdrvtmp] Error 2
make[2]: *** [modules] Error 2
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make: *** [all] Error 2

CLI > ztcfg -v
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

My hardware is:
Processor Pentium IV 3.0 1M 800 775
Motherboard PENTIUM IV ASUS P5VD2 -MX 775
1GB RAM Kingston DDR
HD 80.0 GB IDE W.DIGITAL 7200RPM


Please, help me!

Best Regards

Josue
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061221/00b6fc25/attachment.htm