[asterisk-users] zapata.conf: cannot set txgain lower than -6.3 ?

[Andy Kuo]

Hi Steve,

I tried txgain as low as -18 without any problem, but I never tried
anything with decimal points.

Andy


On 12/12/06, Steve Hsieh <pupfuzz at gmail.com> wrote:
> Greetings everyone,
>
> I have a Digium TDM400P card with both an FXO and FXS module to connect to
> the phone company and to a standard phone. The problem is that the volume of
> my voice is going out too loud.
>
> I tried lowering the txgain value in zapata.conf to compensate, but all
> audio drops out completely if I set txgain to -6.4 or lower. If I set it to
> -6.3, then everything works (but still too loud).
>
> Is there a limitation as to how low txgain can be set? From voip-info.org, I
> was under the impression that the range was -100 to 100. Even the page at
> http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf
> shows an example txgain of -15.9
>
> Thanks.
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>