[asterisk-users] X100P clone dial problems.

Klaverstyn, David C David.Klaverstyn at intergraph.com
Mon Dec 11 02:04:50 MST 2006


Thanks for your help.

 

This is my file.

 

 

 

[channels]

 

language=au

context=from-pstn

signalling=fxo_ks

 

;rxwink=300

 

usecallerid=yes

hidecallerid=no

callwaiting=yes

usecallingpres=yes

callwaitingcallerid=yes

threewaycalling=yes

transfer=yes

canpark=yes

cancallforward=yes

callreturn=yes

echocancel=yes

echocancelwhenbridged=yes

rxgain=0.0

txgain=0.0

callgroup=1

pickupgroup=1

immediate=no

 

channel => 1 

 

 

 

 

 

 

Upon reloading asterisk I get the following errors.

 

 

Dec 11 19:03:45 WARNING[5265]: chan_zap.c:10874 setup_zap: Ignoring
signalling

Dec 11 19:03:45 ERROR[5265]: chan_zap.c:10305 setup_zap: Unable to
reconfigure channel '1'

 

 

 

 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Howard
Lowndes
Sent: Monday, 11 December 2006 6:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] X100P clone dial problems.

 

 

 

Klaverstyn, David C wrote:

> I have since added fxs_ks=1

 

 

This is meaningless.  Follow the example that I posted.

 

 

 

  and channel => 1

> 

> This has not fixed the problem.  I do notice a warning on the reload
of

> asterisk.

> 

> WARNING[4296]: chan_zap.c:10874 setup_zap: Ignoring signalling

> 

> -----Original Message-----

> From: asterisk-users-bounces at lists.digium.com

> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir

> Cohen

> Sent: Monday, 11 December 2006 4:47 PM

> To: asterisk-users at lists.digium.com

> Subject: Re: [asterisk-users] X100P clone dial problems.

> 

> On Mon, Dec 11, 2006 at 04:18:20PM +1100, Klaverstyn, David C wrote:

>> I'm not sure if I have a configuration problem or not. I am unable to

>> dial out. When I try to dial in I can hear the phone ring on the

>> dialling phone but Asterisk does not register anything. 

>> 

>>  

>> 

>>  

>> 

>> In zaptel.conf I have

>> 

>>  

>> 

>> loadzone = au

>> 

>> defaultzone=au

>> 

>> fxsks=1

>> 

>>  

>> 

>> In zapata.conf

>> 

>>  

>> 

>> language=au

>> 

>> context=from-pstn

>> 

> 

> Those need to be in the section [channels] and be followed by a

> 

>   channel => 1

> 

> to actually have any effect. You also must set signaling (signalling =

> fxs_ks; in your case).

> 

 

-- 

Howard.

LANNet Computing Associates - Your Linux people <http://lannetlinux.com>

When you want a computer system that works, just choose Linux;

When you want a computer system that works, just, choose Microsoft.

--

Flatter government, not fatter government; abolish the Australian
states.

 

_______________________________________________

--Bandwidth and Colocation provided by Easynews.com --

 

asterisk-users mailing list

To UNSUBSCRIBE or update options visit:

   http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061211/6dfa3da6/attachment-0001.htm


More information about the asterisk-users mailing list