[asterisk-users] TDM2400

[Tzafrir Cohen]

On Mon, Dec 11, 2006 at 09:40:18AM +1100, Howard Lowndes wrote:
> 
> 
> O.Kamal wrote:
> >I have 16 channels FXO (4 FXO Modules), I did follow the below link, but 
> >maybe I understand it wrong (what is a module and slot?), I need an 
> >example.
> >http://kb.digium.com/entry/1/90/ <http://kb.digium.com/entry/1/90/>
> >
> >"For each FXO module, you should have a coresponding line that reads: 
> >"fxs" followed by the type of signalling (gs, ls, or ks) and the equals 
> >sign (=) followed by the position of the module times 4 minus 3 a dash, 
> >and then the number of the slot times 4.  For example, if you had a FXO 
> >module on slot 2 of the board using loopstart signalling, the line would 
> >read: "fxols=5-8", or if the module was on slot 5, the line would read: 
> >"fxols=17-20"
> 
> OK, try either:
> 
> fxsks=1-16
> 
> or:
> 
> fxsks=1-4
> fxsks=5-8
> fxsks=9-12
> fxsks=13-16
> 
> 
> probably the latter will be correct

Both are. Alternatively, genzaptelconf (xpp/utils/genzaptelconf) will
generate a working (though a bit verbose) configuration.

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir