[asterisk-users] problem with asterisk - calls where both sidescannot hear each other

Ed Nuñez enunez at netoneint.com
Wed Dec 6 07:56:09 MST 2006


If you use both the public and private interfaces for VoIP in the Asterisk Server, make sure you don't specify one of them for the binding in sip.conf

Example

bindaddr=0.0.0.0

will allow SIP traffic on any of your interfaces.



Ed Nuñez
IT/Telecom Engineer
 
4037 Metric Drive
Winter Park, FL
 
(o) 407-384-4200 x 1656
(f) 407-384-4222
(c) 732-925-0730
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Singer Wang
Sent: Tuesday, December 05, 2006 4:23 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] problem with asterisk - calls where both sidescannot hear each other

Hi,

I'm looking for some help with a problem in Asterisk (possibly), and I'm
confused as heck what is going on. I've updated to the latest Asterisk
version and the problem is still occur. My setup is as follows:

I've got Asterisk running on a high end Pentium-IV box running Linux
serving 5 calls, it is located in Canada. The calls come in via analog
lines through TDM400P cards to Asterisk box, which then converts it to
G729 channels to a call center in India over the Internet. Connection
between the Asterisk Server and the India call center is done via two
Cisco PIX501 devices, The call center in India is running 5 agents using
PolyCom phones, and we're using G729 to save bandwith. And yes, we
purchused 5 licenses of G729 codec.

We're using SIP and a ring all strategy, with the first agent that picks
up getting the call. The problem we're having is that about 5-10% calls
are not connecting properly. In that both sides can talk but do not hear
each other. Since we have recording in step s,5 (in the configuration
below), I can verify that it is happening. In these problematic calls,
both sides of the call talk but they cannot hear the other side at all.

I've gone through most of the documentation and spend hours on Google
search, does anyone have any idea what could be the problem? I'm willing
to provide more information if asked. 


My extensions configuration is roughly the following:

[opened]
exten => s,1,SetVar(LOOP=1)
exten => s,2,Answer
exten => s,3,Wait(1)
exten => s,4,Background(open-hiq)
exten =>
s,5,SetVar(MONITOR_FILENAME=/var/spool/asterisk/monitor/inbound/SUPPORT-${UNIQUEID})
exten => s,6,Queue(support||||3600)
exten => s,7,Voicemail(100|us)

exten => 1,1,Goto(opened,s,6)

exten => 500,1,Voicemail(500)


thanks,
Singer Wang

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list