[asterisk-users] Sipura 3000 and Asterisk

[Dave Fullerton]

Francisco Seratti wrote:
> Hi pals, im trying to save some money in cellphones calls, so i bought a 
> GSM gateway and a Sipura SPA3000 gateway.
> The GSM gw is currently working, and now im trying to configure the SPA, 
> but every call i send, i get a 503 service unavailable.
> Im using this extension to match cell calls and sendthem to the spa:
> 
> exten => _15.,1,Dial(SIP/300/${EXTEN})   ; cellphones are 15xxxxxxxx and 
> 300 is the spa3000 extension, registered OK
> exten => _15.,2,Hangup
> 
> In the dialplan section of the sipura, i ve tried many different options 
> like xx.<:@gw0>, (xx.) and many others.
> I cannot find a formal configuration doc for this device, so if you 
> giveme a hand to configure it or tellme where to start, or where
> is the problem i would be very pleased.
> 

This may be a stupid question, but are you sure you are using the 
registration for the FXO port (PSTN Line) and not the FXS port (line 1)
? I usually don't give my trunk lines extension numbers is why I ask.

-Dave