[asterisk-users] GSM gateway and FXO ATA

Sam Tam sam at netenable.co.uk
Fri Aug 25 10:35:36 MST 2006


Hello 

WE can provide you with budget GSM Gateway if you are interested?
Sam

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tomislav
Par?ina
Sent: Tuesday, August 22, 2006 4:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] GSM gateway and FXO ATA

Hi list!

I'm trying to connect Analog GSM gateway (2N Ateus) with Asterisk 1.2.5 over
Grandstream HT488 ATA. I have plugged gateway to FXO port of ATA. Incoming
calls work the way I call GSM number and then I get DISA to call inside
company. Outgoing call work well when I call VoIP number of ATA which calls
gateway and then I dial number I wish to call over gateway. As I said, it
works fine.

Now I would like to dial ATA_number+number_I_wish_to_call so that I don't
have to dial twice when I'm trying to establish outgoing call from company
thru gateway.

I have tried this but it doesn't work well.

; to dial outside thru GSM gateway
exten => _456.,1,Dial(SIP/${EXTEN},30,tTD(${EXTEN:3}))
exten => _456.,n,Hangup 

This is what I see on CLI:

    -- Executing Dial("SIP/577-104c", "SIP/4560989970434|30|tTD(248)") in
new stack
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing Hangup("SIP/577-104c", "") in new stack
  == Spawn extension (sip, 4560989970434, 2) exited non-zero on
'SIP/577-104c'

Why asterisk thinks that gateway is busy when it's not?



--
Tomislav Parčina
Lama Computers Split
Stinice 12, 21000 Split
Tel.: +385(21)495148
Mob.: +385(91)1212148
SIP: tomo at pbx.lama.hr
e-mail: tparcina#lama.hr
http://www.lama.hr
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users







More information about the asterisk-users mailing list