[asterisk-users] modprobe wctdm fails in /etc/rc.local on FC5

[Martti Tienhaara]

Hi Robert

Why don't you select the modules in /etc/sysconfig/zaptel and allow the 
system to boot via /etc/init.d/zaptel by placing a link S99zaptel in 
your appropriate run level directory. I found that S09zaptel, the 
default, didn't work for me in my setup because it was too early in the 
boot process. You have to install zaptel for these files to exist. Hope 
this helps.

Robert La Ferla wrote:
> If I boot my server and manually type "modprobe wctdm", it correctly 
> loads both wctdm and zaptel.  If I put the modprobe in /etc/rc.local and 
> reboot, it fails.  Why?  I am running the latest svn source of zaptel on 
> Fedora Core 5 (w/latest updates as of 8/15)
> 
> Here are the error messages from modprobe:
> 
> Aug 15 15:55:39 WARNING[1860] chan_zap.c: Unable to specify channel 1: 
> No such device or address
> Aug 15 15:55:39 ERROR[1860] chan_zap.c: Unable to open channel 1: No 
> such device or address
> here = 0, tmp->channel = 1, channel = 1
> Aug 15 15:55:39 ERROR[1860] chan_zap.c: Unable to register channel '1'
> Aug 15 15:55:39 WARNING[1860] loader.c: chan_zap.so: load_module failed, 
> returning -1
> Aug 15 15:55:39 WARNING[1860] loader.c: Loading module chan_zap.so failed!
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
-- 
Martti Tienhaara (martti at dash.ca)
DASH Software Ltd.