[asterisk-users] Circuit/channel Congestion

[Ralph Liebessohn]

On 8/11/06, Ralph Liebessohn <ralphliebessohn at gmail.com> wrote:
>
> On 7/24/06, Thomas Laurids Pedersen <tlp at mach.com> wrote:
>
> > I have the same card, but in my zaptel.conf I have the following line
> span=1,1,0,hdb3,crc4
>
> as you can see from the status your line is down.
>
> BR Thomas
>
>
>
>
>              Lincoln Zuljewic
>              Silva
>
>
>
> Hello all. I have a Digium TE110P board and when I do a 'dial 4509' I got:
>
> Jul 24 11:44:33 NOTICE[8180]: app_dial.c:1049 dial_exec_full: Unable to
> create channel of type 'Zap' (cause 34 - Circuit/channel congestion)
>
>
> My zaptel.conf:
> span=1,0,0,cas,hdb3,crc4
> bchan=1-15,17-31
> dchan=16
>
> My zapata.conf:
> [channels]
> context=demo
> priindication=outofband
> pridialplan=local
> prilocaldialplan=local
> overlapdial=yes
> immediate=no
> callprogress=yes
> busydetect=no
> switchtype=euroisdn
> signalling=pri_net
>
> group=1
> callgroup=1
> pickupgroup=1
> channel => 1-15,17-31
>
> My /proc/zaptel/1
> Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3//CRC4
>
>            1 WCT1/0/1 Clear (In use)
>            2 WCT1/0/2 Clear (In use)
>            3 WCT1/0/3 Clear (In use)
>            4 WCT1/0/4 Clear (In use)
>            5 WCT1/0/5 Clear (In use)
>            6 WCT1/0/6 Clear (In use)
>            7 WCT1/0/7 Clear (In use)
>            8 WCT1/0/8 Clear (In use)
>            9 WCT1/0/9 Clear (In use)
>           10 WCT1/0/10 Clear (In use)
>           11 WCT1/0/11 Clear (In use)
>           12 WCT1/0/12 Clear (In use)
>           13 WCT1/0/13 Clear (In use)
>           14 WCT1/0/14 Clear (In use)
>           15 WCT1/0/15 Clear (In use)
>           16 WCT1/0/16 HDLCFCS (In use)
>           17 WCT1/0/17 Clear (In use)
>           18 WCT1/0/18 Clear (In use)
>           19 WCT1/0/19 Clear (In use)
>           20 WCT1/0/20 Clear (In use)
>           21 WCT1/0/21 Clear (In use)
>           22 WCT1/0/22 Clear (In use)
>           23 WCT1/0/23 Clear (In use)
>           24 WCT1/0/24 Clear (In use)
>           25 WCT1/0/25 Clear (In use)
>           26 WCT1/0/26 Clear (In use)
>           27 WCT1/0/27 Clear (In use)
>           28 WCT1/0/28 Clear (In use)
>           29 WCT1/0/29 Clear (In use)
>           30 WCT1/0/30 Clear (In use)
>           31 WCT1/0/31 Clear (In use)
>
> My pri show span 1:
> Primary D-channel: 16
> Status: Provisioned, Down, Active
> Switchtype: EuroISDN
> Type: Network
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: -1
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
>
> My zap show channels:
>    Chan Extension  Context         Language   MusicOnHold
> pseudo            demo
>       1            demo
>       2            demo
>       3            demo
>       4            demo
>       5            demo
>       6            demo
>       7            demo
>       8            demo
>       9            demo
>      10            demo
>      11            demo
>      12            demo
>      13            demo
>      14            demo
>      15            demo
>      17            demo
>      18            demo
>      19            demo
>      20            demo
>      21            demo
>      22            demo
>      23            demo
>      24            demo
>      25            demo
>      26            demo
>      27            demo
>      28            demo
>      29            demo
>      30            demo
>      31            demo
>
> Thanks a lot!
> Lincoln
>
>
> Hi Thomas and everybody else,
>
>
> I am with a problem near Lincoln's.
> When I dial through ZAP (TE406P) the first call complete and as soon as it
> complete it hangup and all the calls after do not complete cause:
>
> NOTICE[4981]: app_dial.c:1029 dial_exec_full: Unable to create channel of
> type 'ZAP' (cause 34 - Circuit/channel congestion)
>   == Everyone is busy/congested at this time (1:0/1/0)
>
> But this only occurs on my new machine (P4 Dual core with Intel d101ggc
> motherboard), on my old machine (AMD Sempron with pcchips motherboard) it
> works with the same installation.
> Do you guys know something to solve it? Have you ever heard something
> similar?
>
>
> --
> Ralph Liebessohn
> ICQ: 74835911
> Skype: liebessohn
>

Hi guys,


someguys told me to take off the echo cancel module from digium card and
test it again. Running the card without the echo cancel module everything
worked fine.
I will make a few more tests but it appears that the problem is really the
echo module.

Thanks by the attention.

-- 
Ralph Liebessohn
ICQ: 74835911
Skype: liebessohn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060814/586f42f5/attachment.htm