[Asterisk-Users] problame with outbound calls on pri

[Doug Langley]

I started with national but then changed it once we looked and the 
other pbx was set for 4ess.  I'll put it back and look at the debug info again.

At 09:07 AM 4/30/2006, you wrote:
>Have you tried switchtype=national ?
>
>Doug Langley wrote:
>>Hi. recently I have been trying to setup a PRI on 
>>asterisk.  Inbound calls are working just fine but I am not able to 
>>make outbound calls.
>>Does anyone know  what I need to change to make outbound calls work?
>>Right now the PRI is instantly hanging up on the outbound calls.
>>I have included full debug info as well as config files.
>>
>>/etc/zaptel.conf
>>span=1,1,1,esf,b8zs
>>bchan=1-23
>>dchan=24
>>loadzone=us
>>defaultzone=us
>>relevant portions of zapata.conf:
>>[trunkgroups]
>>[channels]
>>language=en
>>context=from-pstn
>>pridialplan=unknown
>>signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
>>;signaling=em_w
>>switchtype=4ess
>>group=0
>>channel => 1-23
>>
>>debug info:
>>     -- Executing Dial("SIP/202-2d92", "zap/g0/18005551212") in new stack
>>-- Making new call for cr 32771
>>     -- Requested transfer capability: 0x00 - SPEECH
>>  > Protocol Discriminator: Q.931 (8)  len=48
>>  > Call Ref: len= 2 (reference 3/0x3) (Originator)
>>  > Message type: SETUP (5)
>>  > [04 02 80 90]
>>  > Bearer Capability (len= 4) [ Ext: 1  Q.931 Std: 0  Info 
>> transfer capability: Speech (0)
>>  >                              Ext: 1  Trans mode/rate: 64kbps, 
>> circuit-mode (16)
>>  >                              Ext: 0  User information layer 1: 
>> Unknown (24)
>>  > [18 03 a9 83 81]
>>  > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, 
>> Exclusive Dchan: 0
>>  >                        ChanSel: Reserved
>>  >                       Ext: 1  Coding: 0   Number 
>> Specified   Channel Type: 3
>>  >                       Ext: 1  Channel: 1 ]
>>  > [28 0f b1 74 65 73 74 20 65 78 74 65 6e 73 69 6f 6e]
>>  > Display (len=15) Charset: 31 [ test extension ]
>>  > [6c 05 21 83 32 30 32]
>>  > Calling Number (len= 7) [ Ext: 0  TON: National Number 
>> (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>>  >                           Presentation: Presentation allowed of 
>> network provided number (3) '202' ]
>>  > [70 08 80 33 38 31 36 30 36 38]
>>  > Called Number (len=10) [ Ext: 1  TON: Unknown Number Type 
>> (0)  NPI: Unknown Number Plan (0) '18005551212' ]
>>     -- Called g0/18005551212
>>< Protocol Discriminator: Q.931 (8)  len=10
>>< Call Ref: len= 2 (reference 3/0x3) (Terminator)
>>< Message type: RELEASE COMPLETE (90)
>>< [08 03 83 e0 20]
>>< Cause (len= 5) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0
>>Location: Transit network (3)
>><                  Ext: 1  Cause: Unknown (96), class = Protocol Error (6) ]
>><              Cause data 1: 20 (32)
>>-- Processing IE 8 (cs0, Cause)
>>     -- Channel 0/1, span 1 got hangup
>>     -- Channel 0/1, span 1 received AOC-E charging 0 units
>>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
>>NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>>     -- Hungup 'Zap/1-1'
>>   == Everyone is busy/congested at this time (1:0/0/1)
>--
>Now accepting new clients in Birmingham, Atlanta, Huntsville, 
>Chattanooga, and Montgomery.
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>