[Asterisk-Users] Excessive Asterisk delay to answer on ZAP inboundcall

Eric "ManxPower" Wieling eric at fnords.org
Thu Apr 27 11:17:18 MST 2006


Steven Totaro wrote:
> Open the console with verbose turned up.  Make a test call and see where
> it is hanging.  That will isolate the problem.
> 
>  
>  
>  
> 
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>> bounces at lists.digium.com] On Behalf Of Giorgio Incantalupo
>> Sent: Thursday, April 27, 2006 11:16 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [Asterisk-Users] Excessive Asterisk delay to answer on
> ZAP
>> inboundcall
>>
>> Hi Eric,
>> this is my zapata.conf (zap/1 is a FXS but not used during tests):
>>
>> ;-------------------------------------------------
>> ; Channel: zap/2 [in] - Telecom (lasciare libera)
>> ;-------------------------------------------------
>> language = us
>> musiconhold = default
>> signalling = fxs_ks
>> channel => 2
>> usecallerid=no
>>
>> Note that omitting usecallerid=no does not  change the result.
>>
>> Thanks to all for advices.

You need to set the options BEFORE the channel => line.  In your example 
above you are setting usecallerid=no for all channels AFTER that line, 
of which there are none.

Remember, set the options, then specify the channel they apply to.

-- 
Now accepting new clients in Birmingham, Atlanta, Huntsville, 
Chattanooga, and Montgomery.



More information about the asterisk-users mailing list